Table of Contents
Advertisement
redundant backup function and dual homing function that prevent connection lose between
X-Ring group and upper level/core switch.
Enable X-Ring: To enable the X-Ring function. Marking the check box to enable the
X-Ring function.
Enable Ring Master: Mark the check box for enabling this machine to be a ring
master.
st
nd
1
& 2
Ring Ports: Pull down the selection menu to assign two ports as the
member ports. 1
st
When 1
Ring Port fails, the system will automatically upgrade the 2
be the working port.
Enable Coupling Ring: To enable the coupling ring function. Marking the check box
to enable the coupling ring function.
Coupling port: Assign the member port.
Control port: Set the switch as the master switch in the coupling ring.
Enable Dual Homing: Set up one of port on the switch to be the Dual Homing port. In
an X-Ring group, maximum Dual Homing port is one. Dual Homing only work when
the X-Ring function enable.
And then, click
st
Ring Port is the working port and 2
to apply the configuration.
Apply
X-Ring Interface
85
nd
Ring Port is the backup port.
nd
Ring Port to
Advertisement
Table of Contents
