Sntp Commands Set - TRENDnet TEG-S811FI User Manual

authentication-failure
no event
X-ring-topology-change
no event systemlog
no event smpt
show systemlog

SNTP Commands Set

Trendnet Commands
sntp enable
sntp daylight
sntp daylight-period
[Start time] [End time]
sntp daylight-offset
[Minute]
failure event typ
G Disable X-ring
topology changed
event type
I Disable port event for
system log
I Disable port event for
SMTP
P Show system log client
& server information
Level Description
G Enable SNTP function switch(config)#sntp enable
Enable daylight saving
G
time, if SNTP function
is inactive, this
command can't be
applied.
G Set period of daylight
saving time, if SNTP
function is inactive, this
command can't be
applied.
Parameter format:
[yyyymmdd-hh:mm]
Set offset of daylight
G
saving time, if SNTP
39
authentication-failure
switch(config)#no event
X-ring-topology-change
switch(config)#interface
fastethernet 3
switch(config-if)#no event
systemlog
switch(config)#interface
fastethernet 3
switch(config-if)#no event smtp
switch#show systemlog
Example
switch(config)#sntp daylight
switch(config)# sntp
daylight-period 20060101-01:01
20060202-01-01
switch(config)#sntp
daylight-offset 3