TRENDnet TEG-S50G Quick Installaion Manual

TRENDnet TEG-S50G Quick Installaion Manual

Trendnet teg-s50g: install guide
Hide thumbs Also See for TEG-S50G:

Advertisement

TEG-S50g
TEG-S80g
H/W: V1

Advertisement

Table of Contents
loading

Summary of Contents for TRENDnet TEG-S50G

  • Page 1 TEG-S50g TEG-S80g H/W: V1...
  • Page 2: Table Of Contents

    Table of Contents Table of Contents Français ... 1. Avant de commencer ... 2. Installation du matériel ... 3. LEDs ... 4 English ... 1. Before You Start 2. Hardware Installation ... 3. LEDs ... Technical Specifications ... Dépannage ... Troubleshooting ...
  • Page 3: Français

    Câble CAT 5e ou CAT 6 pour réseaux La surface doit supporter au moins 1,5 kg pour le Switch La prise secteur doit être située à un maximum de 1,82 mètres du Switch Inspectez visuellement la prise d'alimentation et assurez-vous qu'elle est correctement connectée à...
  • Page 4 Delivers less power when devices are off Delivers less power with shorter cable lengths *Max power savings compared with standard TRENDnet switches. Delivers less power to unused ports Delivers less power when devices are off Delivers less power...
  • Page 5: Installation Du Matériel

    2. Installation du matériel 1. Branchez le transformateur AC au TEG-S50g/TEG-S80g ainsi qu’à une prise de courant. 2. Branchez un câble réseau CAT-5e ou CAT-6 RJ-45 de l'ordinateur vers un port Ethernet disponible du TEG-S50g/TEG-S80g Français...
  • Page 6: Leds

    3. LEDs TEG-S50g Alimentation Vert : sous tension. Eteint : hors tension. 1000Mbps Vert: la connexion du port est de 1000 (Full) Eteint : la connexion pour le port est de 10 ou 100 ou rien n'est détecté sur le port.
  • Page 7 Afin d’être sûr de recevoir le meilleur niveau de service clientèle et le meilleur support possibles, veuillez prendre le temps d’enregistrer votre produit en ligne sur: Nous vous remercions d’avoir choisi Trendnet Link/ACT Vert (Fixe) : Relié à un autre périphérique.
  • Page 8: English

    Cat-5e or Cat-6 Network Cable The surface must support at least 1.5 Kg for the Switch The power outlet should be within 1.82 meters (6 feet) of the Switch Visually inspect the DC power jack to make sure that it is securely...
  • Page 9 Delivers less power when devices are off Delivers less power with shorter cable lengths *Max power savings compared with standard TRENDnet switches. Delivers less power to unused ports Delivers less power when devices are off Delivers less power...
  • Page 10: Hardware Installation

    2. Hardware Installation 1. Connect the AC Power Adapter to the TEG-S50g/TEG-S80g and then to a power outlet. 2. Connect a CAT-5e or CAT-6 RJ-45 network cable from the computer to an available Ethernet port of the TEG-S50g/TEG-S80g. English...
  • Page 11: Leds

    3. LEDs TEG-S50g Power Green: Power is on. Not Illuminated: Power is off. 1000Mbps Green: Connection for the port is 1000 (Full) Not Illuminated: Connection for the port is 10 or 100 or nothing is detected on the port. Link/ACT Green(Solid): Link to another device.
  • Page 12 Green: Connection for the port is 1000 (Full) Amber: Connection for the port is 100 (Full/Half) Not Illuminated: Connection for the port is 10(Full/Half) or nothing is detected on the port. Register Your Product www.trendnet.com/register Thank you for choosing TRENDnet English...
  • Page 13: Technical Specifications

    Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex) Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex) Gigabit Ethernet: 2000Mbps (full-duplex) CSMA/CD / Star TEG-S50g: 5 x 10/100/1000 Auto-MDIX RJ-45 ports TEG-S80g: 8 x 10/100/1000 Auto-MDIX RJ-45 ports TEG-S50g: 104KBytes per device TEG-S80g: 128Kbytes per device TEG-S50g: Up to 12Kbytes...
  • Page 14 Dimensions Weight Temperature Humidity Certification Hardware TEG-S50g: Power, Link/ACT, 100Mbps, 1000Mbps TEG-S80g: Power, Link/ACT, 100/1000Mbps 7.5V DC, 1A External Power Adapter 171 x 98 x 28 mm (6.7 x 3.86 x 1.1 in.) TEG-S50g: 430g TEG-S80g” 450g Operating: 0° ~ 40° C (32° ~ 104° F) Storage: -10°...
  • Page 15: Dépannage

    Lorsque je branche un ordinateur à l'un des ports du Switch, le voyant Link/ACT s'allume, mais je n'arrive pas à obtenir des vitesses Gigabit. En premier, regardez les voyants. Avec le TEG-S50g, si le voyant 1000Mbps n'est pas allumé, la vitesse de connexion de l'ordinateur est de 10Mbps ou de 100Mbps.
  • Page 16: Troubleshooting

    When I connect a computer to one of the ports on the Switch, the Power and the Link/ACT LED is lit, but I am not getting Gigabit speeds. First, check the LEDs. If you have the TEG-S50g, if the 1000Mbps LED is off, the computer's connection speed is 10Mbps or 100Mbps. If you have the TEG-S80g, if the 100/1000Mbps LED is amber, the computer's connection speed is 100Mbps.
  • Page 17 Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be pre- authorized by TRENDnet with RMA number marked on the outside of the package, and...
  • Page 18 ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S...
  • Page 19 Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
  • Page 20 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 Copyright ©2009. All Rights Reserved. TRENDnet.

This manual is also suitable for:

Teg-s80g

Table of Contents