Table of Contents
Advertisement
Ingress Limit Frame type: select the frame type that wants to filter. The frame types
have 4 options for selecting: All, Broadcast/Multicast/Flooded Unicast,
Broadcast/Multicast and Broadcast only.
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast only
types are only for ingress frames. The egress rate only supports All type.
All the ports support port ingress and egress rate control. For example, assume port 1
is 10Mbps, users can set it's effective egress rate is 1Mbps, ingress rate is 500Kbps.
The switch performs the ingress rate by packet counter to meet the specified rate
Ingress: Enter the port effective ingress rate(The default value is "0")
Egress: Enter the port effective egress rate(The default value is "0")
And then, click
Rate Limiting interface
to apply the settings
Apply
65
Advertisement
Table of Contents
