Table of Contents
Advertisement
stp-path-cost
[1~200000000]
stp-path-priority
[Port Priority]
stp-admin-p2p
[Auto|True|False]
forwarding time
determines how long
each of the listening
and
learning states last
before the port begins
forwarding.
I
Use the spanning-tree
cost interface
configuration
command to set the
path cost for Spanning
Tree
Protocol (STP)
calculations. In the
event of a loop,
spanning tree
considers the path cost
when selecting
an interface to place
into the forwarding
state.
I
Use the spanning-tree
port-priority interface
configuration
command to configure
a port priority that
is used when two
switches tie for position
as the root switch.
I
Admin P2P of STP
priority on this
interface.
28
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-path-cost 20
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-path-priority
128
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-admin-p2p
Advertisement
Table of Contents
