TRENDnet TEG-S811FI User Manual page 26

reload
default
admin username
[Username]
admin password
[Password]
show admin
dhcpserver enable
Dhcpserver disable
dhcpserver lowip
[Low IP]
dhcpserver highip
[High IP]
dhcpserver subnetmask
[Subnet mask]
dhcpserver gateway
[Gateway]
dhcpserver dnsip
[DNS IP]
dhcpserver leasetime
[Hours]
dhcpserver ipbinding
[IP address]
show dhcpserver
configuration
show dhcpserver clients
G Halt and perform a cold
restart
G Restore to default
G Changes a login
username.
(maximum 10 words)
G Specifies a password
(maximum 10 words)
P Show administrator
information
Enable DHCP Server switch(config)#dhcpserver enable
G
G Disable DHCP Server switch(config)#no dhcpserver
G Configure low IP
address for IP pool
G Configure high IP
address for IP pool
G Configure subnet
mask for DHCP clients
G Configure gateway for
DHCP clients
G Configure DNS IP for
DHCP clients
G Configure lease time
(in hour)
I Set static IP for DHCP
clients by port
P Show configuration of
DHCP server
P Show client entries of
DHCP server
19
switch(config)#reload
switch(config)#default
switch(config)#admin username
xxxxxx
switch(config)#admin password
xxxxxx
switch#show admin
switch(config)#dhcpserver lowip
192.168.1.100
switch(config)#dhcpserver highip
192.168.1.200
switch(config)#dhcpserver
subnetmask 255.255.255.0
switch(config)#dhcpserver
gateway 192.168.1.254
switch(config)#dhcpserver dnsip
192.168.1.1
switch(config)#dhcpserver
leasetime 1
switch(config)#interface
fastEthernet 2
switch(config)#dhcpserver
ipbinding 192.168.1.1
switch#show dhcpserver
configuration
switch#show dhcpserver clients