Input Menu - Dukane ImagePro 8776-W User Manual

INPUT Menu

INPUT Menu
With the INPUT menu, the items shown in the table below
can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
Using the buttons ▲/▼ switches the progress mode.
• This function is performed only for an interlaced signal of a VIDEO
input, an S-VIDEO input or COMPONENT VIDEO input of 55i (480i)
or 65i (576i) signal.
PROGRESSIVE
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the -3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select TURN OFF,
even though the screen image may lose the sharpness.
Using the buttons ▲/▼ switches the noise reduction mode.
• This function performs only at a VIDEO input, an S-VIDEO or
VIDEO NR
COMPONENT VIDEO input of 55i(480i) or 65i(576i) signal.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the buttons ▲/▼ switches the mode for color space.
• This item can be selected only for an RGB signal or a component
COLOR SPACE
video signal (except signals of SCART RGB from the component
video port).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
34
TV ó FILM ó TURN OFF
HIGH ó MID ó LOW
AUTO ó RGB ó SMPTE40 ó REC709 ó REC60
Description