Dukane ImagePro 8776-W User Manual page 139

3.1 How to use "MIU Live Viewer" (Continued)
[JPEG tab]
1) JPEG Quality
When "MIU Live Viewer" is used, it captures PC screen image. Then that is
compressed as JPEG and sent to projector. By control bar in this tab, you can
set compression rate.
Low (At the far left, Low picture quality): Make JEPG compression rate high.
Screen refresh interval becomes shorter due to low volume
transferred data, but picture quality decreases.
High (At the far right, High picture quality): Make JEPG compression rate
low. Screen refresh interval becomes longer due to high volume
transferred data, but picture quality increases.
[Icon in task tray]
To display "MIU Live Viewer" icon in task tray, click "Minimize" button in "MIU Live
Viewer" window. The icon with yellow thunder mark shows that communication is
connected, and it with red cross mark shows that it is disconnected. (Fig. 3.1.3.d
shows while communication is disconnected.)
Double click "MIU Live Viewer" icon in task tray to display "MIU Live Viewer"
window.
3. How to use Projector software – Basics -
Fig. 3.1.3.c "Options", "JPEG" tab
Fig. 3.1.3.d Icon in task tray
49