Dukane ImagePro 8776-W User Manual page 58

MIU Menu
MIU Menu (continued)
Item
INFORMATION display :
Use the ► or ENTER buttons to view network information and confirm settings.
See [INFORMATION] in [User's Manual] – Network Functions] for more information.
~Note~
• Only the first 16 characters of the projector name are displayed.
• Only the first 32 characters of the SSID are displayed.
• When the voltage level of battery for built in clock decreases, set time may
become incorrect even though accurate date and time are input.
Replace a battery through the following the instructions. (61)
• MAC wireless will not be displayed when NETWORK MODE is WIRED
even if wireless LAN SD card is mounted.
• IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY displays "0.0.0.0" at
the following condition.
() NETWORK MODE is WIRELESS and wireless LAN SD card is not
INFORMATION
mounted.
() DHCP is ON and projector dose not get address from DHCP server.
MIU RESTART
Choose the RESTART and press the button ►.
Then use the button ▲ to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART, Network menu may not be controlled approx. 0 seconds.
SERVICE
REMOVE MEDIA
Remove SD CARD and USB memory safely. Choose the media and press
the button ►.
Then use the button ▲ to execute.
~Note~
Make sure to execute this procedure before you remove the SD Card and
USB Memory.
56
Description
SERVICE
REMOVE ALL
REMOVE SD CARD
REMOVE USB
MIU RESTART
MIU RESTART
EXECUTE
CANCEL
SERVICE
REMOVE ALL
REMOVE SD CARD
REMOVE USB
MIU RESTART
REMOVE USB
EXECUTE
CANCEL