Dukane ImagePro 8776-W User Manual page 57

MIU Menu (continued)
Item
MODE
Select the communication connection control
method to use between the PC and projector.
Match to your PC's settings.
Use the ▲/▼ buttons to select the MODE to be
used.
CH
Select the channel when using a wireless LAN
connection.
(Channels  to  are available)
*The available channels would be various
depending on a country. In addition, wireless
LAN card might be required due to the standard.
ENCRYPTION
Select the encrypting method.
Use the ▲/▼ buttons to select the encryption
method to be used.
SETUP
SPEED
Use the ▲/▼ buttons to select the transfer rate.
• The AUTO mode automatically selects the optimum rate.
• Transfer rates may change due to the Network situation.
Mbps : Megabits per second
NETWORK MODE
Select the Network mode.
Use the ▲/▼ buttons to select the Network mode.
~Note~
• Network mode will be initialized whenever the power is turned on
with Power switch.
• The Wireless will be enabled when Wireless Network card is installed.
• The Wired will be enabled when Wireless Network card is not installed.
ADHOC ó INFRASTRUCTURE
WPA-PSK(AES)
ô
WPA-PSK(AES) ó WPA-PSK(TKIP) ó WEP 8bit ó WEP 64bit ó OFF
AUTOó54ó48ó36ó4ó8óóó9ó6ó5.5óó (Mbps)
WIRELESS ó WIRED
Description
MIU Menu
55