Dukane ImagePro 8776-W User Manual page 114

2. Equipment connection and network setting
2.5 Configuring and controlling the projector via a web browser (Continued)
2.5.2 Network Settings (Continued)
Item
Wireless Mode
Mode
CH
(Communication
channel)
Speed
(Communication speed)
Encryption
WEP Key
WPA Passphrase
SSID
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
24
Select "AD-HOC" or "Infrastructure".
Select using channel between "1" and "11".
NOTE
• Depending on the country where you are
the channels may vary. In addition, depending on the
country or region where you are may be required to use
a wireless LAN card that confirm to the standards in the
respective country or region.
Select communication speed.
Select data encryption method.
Input WEP key, which has same length defined by WEP.
When "64bit" or "128bit" is selected, input 10 characters or
26 characters respectively. Only numbers from "0" to "9" and
alphabets from "a" to "f" can be used.
Input WPA Passphrase. Available number of input characters
is 8 to 63. Only alphabets, numbers and following symbols
can be used.
!"#$%&'()*+,-./[¥]^_`{|}~
Set SSID. Maximum number of input characters is 32. Only
alphabets, numbers and following symbols can be used.
!"#$%&'()*+,-./[¥]^_`{|}~
Description