Dukane ImagePro 8776-W User Manual page 138

3. How to use Projector software – Basics -
3.1 How to use "MIU Live Viewer" (Continued)
["Options" window]
["General" tab, Fig. 3.1.3.b]
1) CPU Share
Set up any capturing performance on the PC screen by using control bar
Low (At the far left): Set this position when many CPU resources are required
by applications other than "MIU Live Viewer". This setting is not
good for displaying frequently changed patterns due to decrease in
screen refresh rate by "MIU Live Viewer" performance degrading.
High (At the far right): Set this position when "MIU Live Viewer" requires many
CPU resources. Screen refresh rate increases when "MIU Live
Viewer" is used, but decreases the speed of other application
speed.
2) MultiPC Mode
Select connected PC quantity from 1PC to 4PCs.
3) Cursor Emulation
Enabling this function "ON", display cursor (pointer) prepared by this projector
when cursor is not displayed on output screen. Take out check mark to make it
"OFF" when PC and projector both cursors are displayed.
48
Fig.3.1.3.b "Options", "General" tab