Picture Menu - Dukane ImagePro 8776-W User Manual

PICTURE Menu

With the PICTURE menu, the items shown in the table
below can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
BRIGHTNESS Using the buttons ▲/▼ adjusts the brightness. :
CONTRAST
Using the buttons ▲/▼ adjusts the contrast. :
Using the buttons ▲/▼ switches the GAMMA mode.
Selecting a mode of CUSTOM and then
pressing the button ► or the ENTER button
displays a dialog to aid you in adjusting the
mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the buttons ◄/►, and
adjust the level using the buttons ▲/▼.
GAMMA
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
The eight equalizing bars correspond to eight tone levels of the test
pattern except the darkest in the left end. If you want to adjust the
nd tone from left end on the test pattern (Gray scale of 9 steps),
use the equalizing adjustment bar "". The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• When this function is performed, a certain extra such as a line
may appear.
# DEFAULT ó# CUSTOM ó # DEFAULT ó # CUSTOM ó #3 DEFAULT
#5 CUSTOM ó #5 DEFAULT ó #4 CUSTOM ó #4 DEFAULT ó #3 CUSTOM
To adjust CUSTOM
No pattern ð Gray scale of 9 steps
Ramp  Gray scale of 5 steps
PICTURE Menu
Description
Strong ó Weak
1
+0
Light ó Dark
ENTER :
2 3 4 5 6 7 8
+0 +0 +0 +0 +0 +0 +0
GAMMA [ CUSTOM 1 ]
9