Denon AVR-990 Owner's Manual page 55

4
Press [SEARCH] and hold it down for a 2 seconds or
more to select the display mode.
There are two modes for display the contents recorded on the
b
iPod.
Browse mode
:
This is the mode for displaying the iPod information on the GUI
screen to operate the iPod. In this mode, you cannot perform
operations directly on the iPod itself.
z With the AVR-990's display, only English letters and numbers
�
and certain symbols can be displayed. Any characters that
cannot be displayed are replaced with ". (period)".
Remote mode
:
This is the mode for performing operations directly on the iPod
itself while watching the screen displayed on the iPod. In this
mode, the GUI screen is not displayed.
z "Remote iPod" appears on the main unit's display.
Display mode Browse mode
Audio file S
Playable
Picture file A
files
z1
Video file S
Remote
control unit
S
Active
(AVR-990)
buttons
iPod ®
A
z1 : When using an ASD-11R DENON control dock for iPod.
z2 : Video may not be output, depending on the combination of
ASD-1R or ASD-11R DENON control dock for iPod and iPod.
5
Use to select the item, then press
ui
to select the file to be played.
6
Press [1], ENTER or .
p
Playback starts.
7
Adjust the items below.
Adjusting the master volume
n (vpage 65)
Selecting the surround mode
n (vpage 67)
n Adjusting the Sound and Picture Quality
(vpage 69)
To stop
n
(vpage 65)
Stopping playback temporarily
n
Fast-forwarding or fast-reversing
n
To cue to the beginning of a track
n
Searching pages
n
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound
(vpage 73). The default setting is "Mode 3".
• The title name, artist name and album name can be checked by
<STATUS>
pressing during playback.
• The time (default : 30 sec) for which the GUI menus are displayed
can be set at "GUI" – "iPod" (vpage 41). Press
return to the original screen.
[OFF] <ON/STANDBY>
• Press or
the standby mode before disconnecting the iPod. Also switch the
Remote mode
input source to one to which the menu "iPod" is not assigned before
S
disconnecting the iPod.
z2
S
NOTE
z2
S
• Depending on the type of iPod and the software version, some
functions may not operate.
• DENON will accept no responsibility whatsoever for any loss of iPod
S
data.
S
ENTER or
p
(vpage 65)
(vpage 65)
(vpage 66)
(vpage 66)
uio p to
and set the AVR-990's power to
Viewing Videos on an iPod ® in the Browse Mode
When an iPod equipped with a video function is connected to a
DENON ASD-11R control dock for iPod, video files can be played in
the browse mode.
1
Use to select "Videos", then press
ui
.
p
2
Use to select the search item or folder, then
ui
ENTER
press or p .
3
Use to select the video file, then press
ui
or [1] .
p
Playback starts.
Viewing Still Pictures and Videos on an iPod ® in
the Remote Mode
Photos and videos on an iPod ® equipped with a slide show or video
function can be played using DENON ASD-1R or ASD-11R control
dock for iPod.
1
[SEARCH]
Press and hold to set the Remote mode.
"Remote iPod" is displayed on the AVR-990's display.
2
Watching the iPod's screen, use
"Photos" or "Videos".
3
ENTER
Press until the image you want to view is
displayed.
"TV Out" at the iPod's "Slide show Settings" or "Video Settings"
must be set to "On" in order to display the iPod's photo data or videos
on the monitor. For details, see the iPod's operating instructions.
NOTE
Video may not be output, depending on the combination of ASD-1R or
ASD-11R DENON control dock for iPod and iPod.
ENGLISH
Playing Components
ENTER or
ENTER
,
to select
ui