Denon AVR-990 Owner's Manual page 43

Making the ZONE2 Settings (ZONE2 Setup)
Set the audio to playback with ZONE2.
Setting items
Level Lch –12dB ~ +12dB (0dB)
Adjust the left channel
The "Level Lch" can be set when "Channel" (vpage 40) is set to
output level.
"Stereo".
Level Rch –12dB ~ +12dB (0dB)
Adjust the right channel
The "Level Rch" can be set when "Channel" (vpage 40) is set to
output level.
"Stereo".
Volume Display Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Absolute : Display in the range 0 (Min) ~ 99.
Set how volume is
displayed.
• The "Volume Display" setting is applied also to the "Volume Level",
"Volume Limit" and "Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Level
Variable : Volume adjustment enabled by main unit and remote
controller.
Set the volume output level.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amp.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amp.
When "Amp Assign" (vpage 33) is set to "ZONE2", the "Volume
Level" setting is automatically set to "Variable".
Volume Limit OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
Make a setting for maximum
volume.
Can be set when the ZONE2 "Volume Level" setting (vpage 40) is
"Variable".
Power On Level Last : Use the memorized setting from the last session.
– – – (0) : Always use the muting on condition when power is turned on.
Define the volume setting
that is active when the –80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
power is turned on.
Can be set when the ZONE2 "Volume Level" setting (vpage 40) is
"Variable".
Mute Level
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
Set the amount of attenuation
–20dB : The sound is attenuated by 20 dB down.
when muting is on.
Remote control operation
buttons
Default settings are underlined.
Setting contents
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Making Other Settings (Option Setup)
OPTION
Setting items
Volume Control Volume Display : Set how volume is displayed.
• Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Set the MAIN ZONE volume
• Absolute : Display in the range 0 (Min) ~ 99.
setting.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned
on.
• –80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete
PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / NET/
USB / SIRIUS / HD Radio : Select input source that is not used.
Remove input sources
• ON : Use this source.
that are not used from the
• Delete : Do not use this source.
display.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
SELECT
.
:Confirm the setting
ENGLISH
Making Detailed Settings (Manual Setup)
Default settings are underlined.
Setting contents
SOURCE
See overleaf
0
:Return to previous menu