Denon AVR-990 Owner's Manual page 44

ENGLISH
Making Detailed Settings (Manual Setup)
Setting items
GUI Screensaver : Make screensaver settings.
• ON : The screen saver is activated during GUI menu display or NET/USB
Make GUI related settings.
/ iPod / SIRIUS / HD Radio screen display if no operation is performed
approximately for a continuous 3-minute period. When you press
p , the screen saver is cancelled and the screen before that screen saver
started is displayed.
• OFF : Screen saver is not activated.
Wall Paper : Set wallpaper to display the background when playback is
stopped, etc.
• Picture : Set the background to a picture (DENON logo).
• Black : Set the background to black.
Format : Set the video signal format to be output for the TV you are
using.
• NTSC : Select NTSC output.
• PAL : Select PAL output.
The "Format" can also be set by the following procedure. However,
the GUI screen is not displayed.
1. Press and hold the
seconds.
"Video Format" appears on the display.
2. Press
3. Press the
setting.
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the content of operation during switching of surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.

Remote control operation
buttons
Setting contents
<AUDIO DELAY> <RETURN>
and
o p
and set the video signal format.
<ENTER> <MENU> <RETURN>
, or to complete the
:Displaying the menu
Cancel the menu
Setting items
GUI
(Continued)
uio
for at least 3
Quick Select Name
Change the "Quick Select"
display title to one you
prefer.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Setting contents
Master Volume : Master volume display during adjustment.
• Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "iPod".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
Tuner : Set the tuner screen display time when the input source is
"SIRIUS" or "HD Radio".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
1. Use ui to select the name of the Quick Select setting you want to
ENTER
p
change, then press or .
2. Use o p to set the cursor to the character you want to change.
3. Use ui to change the character, then press
• Up to 16 characters can be input.
• You can change the character type when you press
character input.
• The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
(Space)
GNumbersH 0123456789
4. Repeat steps 1 ~ 3 to change the display name.
:Return to previous menu
ENTER.
[SEARCH]
during