Playback (Basic Operation); Important Information; Selecting The Input Source; Turning The Power On - Denon AVR-E200 Owner's Manual

Playback (Basic operation)

n Turning the power on (vpage 15)
n Selecting the input source (vpage 15)
n Adjusting the master volume (vpage 16)
n Turning off the sound temporarily (vpage 16)
n Switching the brightness of the display
(vpage 16)
n Playing a Blu-ray Disc player/DVD player
(vpage 16)
n Playing a portable player (vpage 16)
n Tuning in radio stations (vpage 17)
Selecting a listening mode (Surround mode)
(vpage 19)
Playback (Advanced operation) (vpage 27)
DVD

Important information

Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.

Turning the power on

Press POWER X to turn on power to
the this unit.
The power indicator flashes green and the
power turns on.
You can also switch the power to standby by pressing
unit.
n When power is switched to standby
POWER X
Press .
GPower indicator status in standby modeH
• Normal standby : Off
• When "Pass Through" (vpage 38) is set to "On" : Red
15

Selecting the input source

Press the input source select button
CBL/SAT DVD Blu-ray
( , ,
AUX , PORTABLE , TV AUDIO
TUNER ) to be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
SOURCE SELECT
Use 0 1.
SOURCE SELECT
0 1 switches the input source, as shown
• Use
below.
CBL/SAT
PORTABLE TV AUDIO
X
on the main
GAME
, ,
or
DVD Blu-ray GAME
TUNER AUX