Setup Menu - TRENDnet TEG-240WS - DATA SHEETS User Manual

24-port 10/100/1000mbps gigabit web-based smart switch
Hide thumbs Also See for TEG-240WS - DATA SHEETS:
Table of Contents

Advertisement

Open Internet Explorer 5.0 or above Web browser.
Enter IP address http://192.168.0.1 (the factory-default IP address
setting) to the address location.
Figure 13.
Or through the Web Management Utility, you do not need to
remember the IP Address, select the device shown in the Monitor List
of the Web Management Utility to settle the device on the Web
Browser.
When the following dialog page appears, remain enter the default
password "admin" and press Login to enter the main configuration
window.
Figure 14.
25
After entering the password, the main page comes up, the screen will
display the device status.
Figure 15. Device Status

Setup Menu

When the main page appears, find the Setup menu in the left side of
the screen (Figure 16). Click on the setup item that you want to
configure. There are eleven options: Port Settings, VLAN Settings,
Trunk Setting, Mirror Setting, Device Status, Statistic, System Settings,
Trap Setting, Password Setting, Backup Setting and Reset Setting as
shown in the Main Menu screen.
26

Advertisement

Table of Contents
loading

Table of Contents