Configuration; Installing The Web Management Utility; Discovery List - TRENDnet TEG-240WS - DATA SHEETS User Manual

CONFIGURATION

Through the Web Browser you can configure the Switch such as
VLAN, Trunking, QoS... etc.
With the attached Web Management Utility, you can easily discover
all the Web Management Switch, assign the IP Address, changing the
password and upgrading the new firmware.

Installing the Web Management Utility

The following gives instructions guiding you through the installations
of the Web Management utility.
1. Insert the Utility CD in the CD-Rom Drive.
2. From the Start menu on the Windows desktop, choose Run.
3. In the Run dialog
Utility\setup.exe (D:\ depends where your CD-Rom drive is
located) and click OK.
4. Follow the on-screen instructions to install the utility.
5. Upon completion,
web_management_utility and execute the Web Management
utility. (Figure 7.)
box, type D:\Web Management
go to Program Files
17
The Web Management Utility was divided into four parts, Discovery
List, Monitor List, Device Setting and Toolbar function, for details
->
instruction, follow the below section.

Discovery List

This is the list where you can discover all the Web management
devices in the entire network.
By pressing the "Discovery" button, you can list all the Web
Management devices in the discovery list.
Double click or press the "Add to monitor list" button to select a
device from the Discovery List to the Monitor List.
Figure 7. Web Management Utility
18