Deleting A Pattern - Brother PR-600 Manual

Sapphire.book Page 127 Friday, August 1, 2003 9:12 AM
4 Touch .
The color change is confirmed.
• Make sure to touch
new color, otherwise the thread color is not
changed.
• If the wrong thread color is specified or if
you wish to change the thread color again,
select a different thread color, and then
touch .
2
5 Repeat steps through
all parts that you wish to change are changed.
6 After making the desired changes, touch
.
The pattern editing screen appears again.
Memo
● Touch
to specify pause locations.
For details, refer to "Specifying pause
locations before embroidering" on page 90.
● The color thread table can be changed to a
custom thread that you create to reflect the
thread colors that you have. (Refer to
"Custom thread table settings" on
page 147.)

Deleting a pattern

1
to specify the
2
4
until the colors of
Editing the Embroidery Pattern (Pattern Editing Screen)
Touch .
The screen shown below appears.
Touch .
The pattern is deleted.
• To quit deleting the pattern, touch
5
.
127