Patterns; Embroidering - Brother PR-600 Manual

Sapphire.book Page 58 Friday, August 1, 2003 9:12 AM
EMBROIDERING TUTORIAL ———————————————————————————————————————————————————

PATTERNS:

Following patterns can be used to embroider by the
machine.
- Embroidery data with *.pes, *.phc or *.dst format.
Either CompactFlash card or floppy disk transfers
the data to the machine. Also via USB cable, the
data can be transferred from the PC to the
machine.
- Optional embroidery cards
- Embroidery patterns created by PE-Design
- The patterns saved on the floppy disk by the
machine

EMBROIDERING:

■ Want to set the own embroidery colors instead
of the preset colors
- Use the "Change thread color" function by
selecting the key on either the "pattern editing"
or the "embroidery setting" screen. More
details please see the page 128.
- Use the "Temporary needle bar setting"
function by selecting the key on the
"embroidering" screen. More details please see
the page 92.
■ Want to stop embroidering in the middle of
pattern and turn off the power. Then want to
resume the embroidery later
- The machine remembers the pattern and the
position even after turning off the power. And
the machine can resume the embroidery when
the machine turns on again. (Refer to page 60)
58
■ Getting false thread breakage error
- Check that the position of upper thread is in
pretension plates. (Refer to page 36)
- Check that the position of upper thread is
around the tension disk pulley. (Refer to
page 37)
1 Pretension plates
2 Tension disk pulley
■ Thread tension changed suddenly
- Thread is caught on a rough edge of the spool
of upper thread.
- Upper thread is caught under the spool of
thread.
- The thread dust or lint is not gathered under
the bobbin's tension spring.
■ The frame came out from the carriage
Make sure that the positioning pins are placed
into the frame's positioning slot and hole. (Refer
to page 31)
It is a good idea to turn off the machine once to
originate the carriage before you re-sew the
pattern.
■ Want to reset the sewing and start from the
scratch
Select the "New Embroidery" key on the upper
left of the screen. The pattern and all information
will be deleted. (Refer to page 48)