Changing The Colors Of The Pattern - Brother PR-600 Manual

Sapphire.book Page 130 Friday, August 1, 2003 9:12 AM
Selecting/Editing/Saving Patterns
The size of the pattern is displayed after a key
is touched to change it.
1 Repeat spacing (vertical)
2 Repeat spacing (horizontal)
• To quit repeating the pattern and return it to
its original arrangement, touch
that it changes to
4
If necessary, touch the arrow keys to adjust
the position of the embroidery frame.
For more details, refer to page 70.
5 If necessary, touch
embroidering area.
For more details, refer to page 32.
6 After specifying the desired repeat settings,
touch .
The embroidering settings screen appears
again.
Memo
● If
is touched to return to the pattern
editing screen after specifying repeat settings,
the pattern appears as it did before the repeat
settings were specified, but the settings are not
cancelled. When the embroidering settings
screen is displayed again, the pattern appears
with the repeat settings applied. However, if an
error occurs, for example, if the pattern is
enlarged in the pattern editing screen so that it
extends out of the embroidering area when it is
repeated, the following error message appears.
1 Touch to cancel the repetition setting and give
priority to the editing operation performed in
the pattern editing screen.
2 Touch to return to the pattern editing screen
so that the pattern can be re-edited.
130
—————————————————————————————————————————————————
Changing the colors of the
pattern
The colors of the pattern can be changed and
previewed in the screen. The function and operation
for this key is the same as that for the change thread
color key in the pattern editing screen.
1
so
.
to check the
2
Touch .
The change thread color screen appears.
For details on changing the colors, refer to
page 126.
Memo
● Even if
is touched to return to the
pattern editing screen after colors are
changed, the settings are not cancelled.