Getting Ready - Brother PR-600 Manual

Sapphire.book Page 1 Friday, August 1, 2003 9:12 AM
1

GETTING READY

After unpacking the PR-600, first refer to "Included Accessories" on page 4, and check
that all listed accessories are included. After checking that all accessories are
included, the embroidery machine can be set up.
The setup of the PR-600 and the various preparations required before starting to sew
are described in this chapter.
Names of Machine Parts and Their Functions ........................................................... 2
Front view / 2
Operation panel / 3
Included Accessories................................................................................................. 4
Accessories / 4
Optional Accessories................................................................................................. 5
Setting Up the Machine.............................................................................................6
Setup and transporting precautions / 6
Setting up the machine / 8
Preparing the thread guide assembly / 10
Attaching the embroidery frame holder / 11
Right-side/rear view / 3
Setup location / 7
Adjusting the operation panel position / 9
Positioning the spool stand / 11