Brother PR-600 Manual page 217

Sapphire.book Page 199 Friday, August 1, 2003 9:12 AM
The thread picker did not oper-
ate correctly.
The thread is entangled on the
thread picker, remove the
thread, and then touch
Patterns on the floppy disk can-
not be read.
The floppy disk may be dam-
aged.
Patterns cannot be deleted
from the floppy disk.
The floppy disk may be dam-
aged.
was touched while no
CompactFlash card is inserted.
Insert a CompactFlash card.
(Refer to page 114.)
was touched while no
floppy disk is inserted or the
floppy disk is damaged.
.
Insert a floppy disk or use a dif-
ferent floppy disk.
The pattern cannot be stored
on the media.
For a floppy disk: If the pattern
still cannot be stored, even after
the floppy disk drive is cleaned,
use a different floppy disk.
For a CompactFlash card: Use a
different card.
The floppy disk cannot be for-
matted.
Use a different floppy disk.
The inserted CompactFlash
card cannot be used.
Use a different CompactFlash
card.
The inserted floppy disk cannot
be used.
Use a different floppy disk.
The pattern is being saved onto
a write-protected floppy disk.
Cancel the write-protection
before trying to store the pat-
tern.
While the pattern list screen for the
floppy disk was displayed, the floppy
disk was removed or changed and a
pattern was selected.
Insert the previous floppy disk or dis-
play the pattern list screen for the
new floppy disk and select a pattern.
Patterns on the CompactFlash
card cannot be read.
The CompactFlash card may be
damaged.
Troubleshooting
7
199