Brother PR-600 Manual page 111

Sapphire.book Page 93 Friday, August 1, 2003 9:12 AM
Memo
● The thread color (needle bar) change
specified as described above only applies
until the next color change. If the pattern
contains another area with the same color
or when the same pattern is sewn the next
time, the area is sewn with the original
color.
● The thread color (needle bar) can be
changed with this procedure even when the
machine has been stopped with a specified
pause or at the time of spool change.
● If the start/stop button was pressed to stop
the machine while an area was being sewn,
a temporary needle bar setting cannot be
applied. The thread color (needle bar)
cannot be changed in the middle of an area
that is being sewn.
Temporary Needle Bar Setting
4
93