Computer (Usb) - Brother PR-600 Manual

Sapphire.book Page 111 Friday, August 1, 2003 9:12 AM

Computer (USB)

Using the included USB cable, the embroidery
machine can be connected to your computer, and
the embroidery patterns saved on the computer can
be temporarily recalled and used from the machine.
Note
Check that the computer to be connected
meets the following operating conditions.
● Compatible models:
IBM-PC with a USB port as standard
equipment
IBM-PC-compatible computer
equipped with a USB port as
standard equipment
● Compatible operating systems:
Microsoft Windows Me/2000/XP
* Windows 98 requires a driver. Download the
driver from our Web site (www.brother.com).
■ Connecting
1
Plug the USB cable connector into the
corresponding connectors on the computer
and the USB port connector on the
embroidery machine.
• The USB cable can be plugged into the USB
connectors on the computer and embroidery
machine whether or not they are turned on.
Note
● The connectors on the USB cable can only
be inserted into a connector in one
direction. If it is difficult to insert the
connector, do not insert it with force and
check the orientation of the connector.
● For details on the position of the USB port
on the computer (or USB hub), refer to the
instruction manual for the corresponding
equipment.
● Connection through a USB hub may not be
possible, depending on the operating
environment. If a connection is not
possible, connect the cable to the USB port
of the computer.
2
After the "Removable Disk" folder appears in
the "My Computer" folder on the computer,
the connection is completed.
■ Recalling
1
Move/copy the pattern data that you wish to
recall into the "Removable Disk" folder.
Pattern data in the "Removable Disk" folder
is written to the machine.
• While data is being written, do not
disconnect the USB cable.
• Do not create folders within the "Removable
Disk" folder. Since folders are not displayed,
pattern data within folders cannot be
recalled.
Selecting an Embroidery Pattern
5
111