Installation Position - Fagor IF-900S Manual To Installation

C60T376A8.qxd 14/3/07 16:21 Página 6
3
FASTENING TO THE WORKTOP
A
Fit the hob into the space in the
unit pressing down well to close
the seal properly.
B
Fix the four hob plate hooks
underneath in the unit space cor-
ners.
4

INSTALLATION POSITION

There must be a current of fresh air to cool your induction hob's electronics circuits as
shown in the diagram.
40mm minimum
50mm
IMPORTANT
Installation must guarantee that fresh air can come from the rear and that a vent measu-
ring at least 5 mm allows the air to escape in the front part.
5mm minimum
Hob on oven
6
50mm Hob on unit
5mm minimum