Compact Command; Timer Function; Operation; Switching On A Hob - Fagor IF-900S Manual To Installation

C60T376A8.qxd 14/3/07 16:21 Página 14

COMPACT COMMAND

A

OPERATION

SWITCHING ON A HOB

The operation is the same as described for the commands with special functions.

ACOUSTIC SIGNAL

The operation is the same as described for the commands with special functions.

TIMER FUNCTION

Steps to follow to time a hob:
A
Switch on a hob. In order to switch the hob on, press the
Then select the chosen power level using the "+" or "-" buttons on the power
sensors.
B
Switch on the timer. For this purpose, press
to time is displayed using these symbols.
C
If you press repeatedly on
Once the hob to time has been selected, the time is assigned using the "+" or "-" timer
D
buttons. This will display the time in minutes. If you start with "+" the display will initially
read "00" minutes. If you start with "-"the display will initially read "99" minutes.
E
This time will count down until it reaches zero and then the hob will switch off.
IMPORTANTE
Only one hob can be timed at once. To stop timing, press the button
which is timed will alternately display the working power and a "t".
B C
, the hob position will rotate.
A
Timer sensors and display
B
On/Off sensor
C Power sensors and
displays from "0" to "9"
D
Safety sensor and display
D
button for this hob.
. The zone you wish
14
. The hob