Timer Function; Acoustic Signal - Fagor IF-900S Manual To Installation

C60T376A8.qxd 14/3/07 16:21 Página 10

TIMER FUNCTION

Steps to set a hob timer:
A
Switch on a hob. To switch on the hob, press the
button on this hob. Then select the power
you wish with the "+" or "-" buttons for the power
sensors.
B
Assign a time to the timer. To do this, press the "+"or "-"
button on the timer, and it shows the time in minutes.
If you start with "+" it will initially display "00" minutes.
If you start with "-" it will initially display "99" minutes.
C This time will count down until it reaches zero and then
the hob will switch off.
IMPORTANT
If no time is selected and the display shows 00, the timer will switch off, and if it indicates 99,
it will take 99 minutes as its timer time.

ACOUSTIC SIGNAL

It is possible to silence the appliance, or deactivate the acoustic signals.
They can only be activated or deactivated when the hob top is switched off.
• In order to deactivate the acoustic signal, press simultaneously on the
"+"power commands and "+" for the timer commands on the keypad for
the right or rear right cooking zone (depending on the model) until the
"bE Ep" symbol appears, keep pressing until the digits disappear.
• In order to activate the acoustic signal, press simultaneously on the "+"
power commands and "+" timer commands on the keypad for the right
or rear right cooking zone (depending on the model) until the "bE Ep"
symbol appears, and an acoustic signal sounds, then stop pressing the
buttons.
10