Installation Instructions; Make The Worktop Recess - Fagor IO-TGC-0241/2 Instruction Manual

INSTALLATION INSTRUCTIONS

Make the worktop recess

The worktop must be flat and level. Edge of the worktop near the wall must be
sealed to prevent ingress of water or other liquids.
Worktop must be made of materials, including veneer and adhesives, resistant to a
temperature of 100°C. Otherwise, veneer could come off or surface of the worktop
become deformed.
Edge of the opening should be sealed with suitable materials to prevent ingress of
water.
Ensure sufficient clearance below the hob to allow proper air circulation and pre-
vent overheating. Please read on for more information on correct clearance.
Worktop opening must be cut to dimensions as shown on figure below (measure-
ment unit [mm]):
5 6
4
0 -
4 9
0 - 5 6
5 0
4 9 4
47