Now, Switch D becomes a slave device.
3)
Verify the configuration
# Display the stack topology on Switch A.
Select IRF from the navigation tree of Switch A and click the Topology Summary tab.
You can view the information as shown in
Figure 1-11 Verify the configuration
Configuration Guidelines
When configuring an IRF stack, note that:
1)
If a device is already configured as the master device of a stack, you are not allowed to modify the
private IP address pool on the device.
2)
If a device is already configured as a slave device of a stack, the Global Settings area on the slave
device is grayed out.
Figure
1-11.
1-11