Displaying Device Information - 3Com Baseline 2928 PWR Plus User Manual

Basic system information
The INFO area on the right of the page displays the basic system information including device name,
product information, device location, contact information, serial number, software version, hardware
version, BootROM version, and running time. The running time displays how long the device is up since
the last boot.
You can configure the device location and contact information on the Setup page you enter by selecting
Device > SNMP.
System resource state
The System Resource State displays the most current CPU usage and memory usage.
Recent system operation logs
Table 1-1 describes the fields in the recent system operation log table.
Table 1-1 Description about the recent system operation logs
Field
Time
Level
Description
The Summary page displays up to five the most recent system operation logs about the login and
logout events.
For more system operation logs, you can click More to enter the Log List page. You can also enter
this page by selecting Device > Syslog. For details, refer to Log Management Configuration.

Displaying Device Information

After you log in to the Web interface, you can click the Device Information tab to enter the page
displaying the device ports. Hover the cursor over a port and the port details appears, including the port
name, type, speed, utilization, and status, as shown in
number and its color, see
the fan working status.
This field displays the time when the system operation logs are generated.
This field displays the severity of the system operation logs.
This field displays the description of the system operation logs.
Figure 1-2. Similarly, you can also view the power type and working status and
Description
Figure 1-2. For the description about the port
1-2