Figure 1-7 Configure an MST region
Table 1-8
describes the configuration items of configuring an MST region.
Table 1-8 Configuration items of configuring an MST region
Region Name
Revision Level
Manual
Modulo
Return to
MSTP configuration task
Configuring MSTP Globally
Select Network > MSTP from the navigation tree, and then click Global to enter the page for
configuring MSTP globally, as shown in
Item
MST region name
The MST region name is the bridge MAC address of the
device by default.
Revision level of the MST region
Instance ID
Manually add VLAN-to-MSTI mappings. Click Apply to add
the VLAN-to-MSTI mapping entries to the list below.
VLAN ID
The device automatically maps 4094 VLANs to the
Modulo Value
corresponding MSTIs based on the modulo value.
list.
Figure
1-8.
1-16
Description