2
Configuration Through the Web Interface
Web-Based Network Management Operating Environment
3Com provides the Web-based network management function to facilitate the operations and
maintenance on 3Com's network devices. Through this function, the administrator can visually manage
and maintain network devices through the Web-based configuration interfaces.
Figure 2-1
shows a Web-based network management operating environment.
Figure 2-1 Web-based network management operating environment
Logging In to the Web Interface
Default Login Information
The device is provided with the default Web login information. You can use the default information to log
in to the Web interface.
Table 2-1 The default Web login information
Information needed at login
Username
Password
IP address of the device (VLAN-interface 1)
1)
The device is not connected to the network, or no DHCP server exists in the subnet where the
device resides
If the device is not connected to the network, or no DHCP server exists in the subnet where the device
resides, you can get the default IP address of the device on the label on the right of the device rear
panel, as shown in
Figure
2-2. The default subnet mask is 255.255.0.0.
Default value
admin
None
Default IP address of the device, depending on the
status of the network where the device resides.
2-1