Input DSCP value
48 to 55
56 to 63
In the default DSCP to DSCP mapping table, an input value yields a target value equal to it.
QoS Configuration
Configuration Task Lists
Configuring a QoS policy
A QoS policy involves three components: class, traffic behavior, and policy. You can associate a class
with a traffic behavior using a QoS policy.
1)
Class
Classes are used to identify traffic.
A class is identified by a class name and contains some match criteria.
You can define a set of match criteria to classify packets. The relationship between criteria can be and
or or.
and: The device considers a packet belongs to a class only when the packet matches all the criteria
in the class.
or: The device considers a packet belongs to a class as long as the packet matches one of the
criteria in the class.
2)
Traffic behavior
A traffic behavior, identified by a name, defines a set of QoS actions for packets.
3)
Policy
You can apply a QoS policy to a port.
Applies a QoS policy to a port to regulate the inbound traffic of the port. A QoS policy can be applied to
multiple ports. Only one policy can be applied in inbound direction of a port.
Perform the tasks in
Table 2-6 QoS policy configuration task list
Configure a
class
Local precedence (Queue)
6
7
Table 2-6
to configure a QoS policy:
Task
Creating a Class
Configuring Classification Rules
Required
Create a class and specify the logical
relationship between the match criteria
in the class.
Required
Configure match criteria for the class.
2-12
CoS
6
7
Remarks