Table of Contents
Advertisement
port receiving buffer is full. Press 0 to disable flow control and press 1 to
set data rate as 100Mbps.
NOTE : Flow control is only available in half-duplex mode. In full-duplex
mode, flow control is not available. The port status & setting list
indicates only the setting configured for flow control rather than the
status of flow control.
Port Counter
With the Port Counter, you can do the following:
C: Monitor statistics related to the traffic status of each port.
The screen below is the Port 2 counter.
NOTE : Any changes you make to a specific port will clear the
counters of that port and return that port counter to the
default settings.
Connecting the Switch
10/100 Fast Ethernet Switch User's Guide
Figure 14, Counters for Port 2
25
Advertisement
Table of Contents
