Table of Contents
Advertisement
10/100 Fast Ethernet Switch User's Guide
Parameters in this screen are described in the following table.
Field
TX Packet Count
RX Byte Count
RX Packet Count
RX Broadcast
PKT
RX Multicast
PKT
RX Reject Count
RX Drop Event
Count
FCS Error Count
Alignment Error
PKT
Under Size PKT
Over Size PKT
Fragment PKT
Count
26
Description
The number of packets that have been
transmitted successfully by the selected port.
Packets are from 64-1518 bytes, including the
CRC.
The size, in bytes, of all packets received and
forwarded successfully by the selected port.
The number of packets that have been received
successfully on the selected port.
The number of broadcast packets that are
received.
The number of multicast packets that are
received.
The number of discarded packets that are
received on the selected port. These frames
are discarded at the receiving port because of
frame filtering.
The number of lost packets received on the
selected port. Lost packets result from the lack
of internal receive buffer space.
The number of packets with cyclic redundancy
check (CRC) errors that are received on the
selected port.
The number of alignment errors received on the
selected port. An alignment error occurs when
a received packet is not an integral number of
bytes.
The number of packets received that were well
formed but less than 64 bytes long.
The number of packets received that were well
formed but greater than 1,518 bytes long.
The number of packets received that were less
than 64 bytes long and had either a CRC error
or an alignment error.
Connecting the Switch
Advertisement
Table of Contents
