Port Forwarding - D-Link DSL-226 User Manual

Section 4 - Configuration
Port forwarding allows you to specify ports to open for specific devices on the
network. This might be necessary for certain applications to connect through
the router. To access this page, go to Features > Port Forwarding.
If you wish to remove a rule, click
in the Edit column. If you wish to create a new rule, click the Add
rule, click
Rule button. Click Save when you are done. If you edit or create a rule, the
following options will appear:
Port Forwarding Setup
Enable Rules:
Enable or disable the port forwarding rule.
Name: Enter a name for this rule.
Internal Start/End
Enter the internal start/end port for this type of service.
Port:
External Start/End
Enter the external port for this type of service.
Port:
Internal Server IP: Enter the IP address of the computer on your local network that should
receive the service requests.
Select TCP, UDP or both TCP/UDP. Refer to the documentation for
Protocol Type:
this service hosting on your internal computer.
Click Apply when you are done. After creating a port forwarding rule, you can
enable it or disable it. The Status column will reflect its current enable/disable
status. A maximum of 16 rules can be defined.
D-Link DSL-226 User Manual

Port Forwarding

in the Delete column. If you wish to edit a
66