Connecting The Switch; Pc To Switch - D-Link DES-1012 User Manual

10/100 Fast Ethernet Switch User's Guide
7
C T
4
ONNECTING HE
S
WITCH
This chapter describes how to connect the DES-1012 to your Fast Ethernet
network.

PC to Switch

A PC can be connected to the Switch via a two-pair Category 3, 4, 5 UTP
/STP straight cable. The PC (equipped with a RJ-45 10/100 Mbps jack) can
be connected to any of the ports.
Figure5, The Switch connected to a PC or Workstation
The LED indicators for a PC connection are dependent on the LAN card
capabilities. If the LEDs are not illuminated after making a proper
13

Connecting the Switch