Controlling Other Components - Onkyo TX-NR515 Instruction Manual

Controlling Other Components

By pressing the REMOTE MODE button that's been
programmed with the remote control code for your
component, you can control your component as described
below.
For details on entering a remote control code for other
components, see "Entering Remote Control Codes"
(➔ page 71).
Controlling a TV
TV is preprogrammed with the remote control code for
controlling a TV that supports the p
some models). The TV must be able to receive remote
control commands via p and be connected to the
AV receiver via HDMI. If controlling your TV via
p doesn't work very well, program your TV's
remote control code into TV and use the TV remote mode
to control your TV.
Use the following remote control codes:
11807/13100/13500:
TV with p
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the p
(limited to some models). The component must be able to
receive remote control commands via p and be
connected to the AV receiver via HDMI.
Use the following remote control codes:
32910/33101/33501/31612:
Blu-ray Disc/DVD player with p
*1 The p supported by the AV receiver is the CEC system
control function of the HDMI standard.
Press the appropriate REMOTE
MODE button first.
(limited to
*1
a
b
c
d
e
f
*1
g
h
i
j
k
l
m
n
o
En-73
Controlling Other Components
■
TV operation
Available buttons
g Number: 1 to 9, 0
a 8, INPUT, TV VOL q/w,
MUTING
Number: +10
b GUIDE i DISPLAY
j MUTING
c q/w/e/r
ENTER
k CH +/–
d SETUP l PREV CH
m RETURN
e 1, 3, 2, 5, 4,
7, 6
*1 n AUDIO
f A (Red) *1 o CLR
B (Green) *1
C (Yellow) *1
*1
D (Blue)
■
Blu-ray Disc player / HD DVD player operation
Available buttons
b TOP MENU
h 8SOURCE
i DISPLAY
c q/w/e/r
ENTER
j MUTING
d SETUP k CH +/–
DISC +/–
e 1, 3, 2, 5, 4,
7, 6 l MENU
f A (Red) m RETURN
B (Green) n AUDIO
C (Yellow) o CLR
D (Blue)
g Number: 1 to 9, 0
Number: +10 *1
*1
*1
*1