Controlling Other Components; Entering Remote Control Codes - Onkyo TX-L55 Instruction Manual

Controlling Other Components

You can use the TX-L55's remote controller (RC-575S)
to control your DVD player and TV, even if it's made by
another manufacturer. To do this, you first need to enter
the appropriate remote control code for your DVD player
and TV. Then you need to select the corresponding
remote controller mode (see page 11).
ON STANDBY
T V
I
STANDBY
1 2 3
4 5 6
Number
7 8 9
buttons
+ 10
0 CLEAR
--/---
TONE
_
+
DVD V1 V2
INPUT SELECTOR
TV AUX TUN
DIMMER
TV
INPUT
+
CH
ENTER
DISC
-
EXIT GUIDE
PREV
CH
DISPLAY
PLAY MODE SP A SP B
AUDIO SUBTITLE ANGLE
DIRECT STEREO SURR

Entering Remote Control Codes

Entering the appropriate remote control code for your
DVD player and TV will allow you to control them with
the TX-L55's remote controller. You'll need to perform
this procedure twice to enter the codes for both your
DVD player and TV.
1
Look up the remote control code
for your DVD player or TV.
See "Remote Control Codes" on
page 56.
2 While holding down the REMOTE
MODE [DVD] or [TV] button,
REMOTE
MODE
press the [STANDBY] button.
AMP
TUNER
DVD
TV
STANDBY
Transmit
indicator
INPUT
+
TV CH
-
T V VOL
REMOTE
MODE
AMP
TUNER
DVD
DVD
TV
TV
SLEEP
If the remote controller doesn't work as expected, try
VOL
entering the code again, or try another code.
MUTING
Codes for Onkyo DVD Players
RANDOM
The remote control code you use for an Onkyo DVD
LAST M
player depends on whether it's connected via
DSP
lows:
3
Within 30 seconds, use the
number buttons to enter the 4-
digit remote control code.
1 2 3
4 5 6
7 8 9
+ 10
0
4
Select the remote controller
mode, point the remote con-
troller at your DVD player or TV,
and check its operation.
Remote controller buttons that can be
used with DVD mode are shown on
page 12. Those that can be used with
TV mode are shown on page 14.
5001: Use this code if you've connected an
and an analog audio cable (RCA) to your DVD
player. This is the default setting, so if you're
using , you don't need to change anything.
Point the remote controller at the TX-L55 to
control the DVD player.
5002: Use this code if your DVD player doesn't have
an socket, or you're not using
the remote controller at the DVD player to con-
trol it.
, as fol-
cable
. Point
55