Onkyo TX-NR515 Instruction Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Receiver
  5. TX-NR515
  6. Instruction manual

Onkyo TX-NR515 Instruction Manual

Owner manual
Hide thumbs Also See for TX-NR515:
Table of Contents

Advertisement

Quick Links

Enlarged version
AV RECEIVER
TX-NR515
Instruction Manual
Contents

Table of Contents ...........................................6

Connections .................................................12
Turning On & Basic Operations..................20
Advanced Operations ..................................45
Controlling Other Components...................68
Appendix .......................................................75
Internet Radio Guide
Remote Control Codes
E
n

Advertisement

Table of Contents
loading

Related Manuals for Onkyo TX-NR515

Summary of Contents for Onkyo TX-NR515

  • Page 1: Table Of Contents

    Contents AV RECEIVER Safety Information and Introduction ....2 TX-NR515 Table of Contents ...........6 Connections ..........12 Turning On & Basic Operations....20 Instruction Manual Advanced Operations ........45 Controlling Other Components....68 Appendix ............75 Internet Radio Guide Remote Control Codes...

  • Page 2: Safety Information And Introduction

    Important Safety Instructions exposed to rain or moisture, does not operate normally, Leave 20 cm (8") of free space at the top and sides and 1. Read these instructions. or has been dropped. 10 cm (4") at the rear. The rear edge of the shelf or 2.

  • Page 3: Precautions

    • If you do not use this unit for a long time, it may not requirements printed on the unit’s rear panel (e.g., AC...
  • Page 4 MATCH WIDE BLADE OF PLUG TO WIDE SLOT, If the power cord’s plug is not suitable for your socket FULLY INSERT. outlets, cut it off and fit a suitable plug. Fit a suitable fuse Modèle pour les Canadien in the plug.

  • Page 5: Supplied Accessories

    • If the remote controller doesn’t work reliably, try replacing the batteries. • Don’t mix new and old batteries or different types of batteries. • If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

  • Page 6: Table Of Contents

    Using the Audio Settings of Quick Setup....46 Turning On & Basic Operations Using the Setup Menu (HOME) ........ 48 To reset the AV receiver to its factory defaults, turn it About the HYBRID STANDBY indicator ....49 on and, while holding down CBL/SAT, press Turning On/Off the AV Receiver ........20...

  • Page 7: Features

    Safety Information and Introduction Features Connections • 8 HDMI Inputs (1 on front panel) and 2 Outputs Amplifier • Onkyo p for System Control • 4 Digital Inputs (2 Optical/2 Coaxial) • 80 Watts/Channel @ 8 ohms (FTC) • Component Video Switching (1 Input/1 Output) •...

  • Page 8: Front & Rear Panels

    For detailed information, see the pages in parentheses. j SETUP button (48) t USB port (17) a 8ON/STANDBY button (20) k TUNING q/w (31), PRESET e/r (32), cursor and u SETUP MIC jack (35) ENTER buttons b ZONE 2, OFF buttons (67)

  • Page 9: Display

    Z2 (Zone 2) indicator (67) HDMI indicator (62) b 3D indicator DIGITAL indicator This lights when a 3D input signal is detected. k ARC indicator (63) c Headphone indicator (44) l USB indicator (25, 26) d 1, 3 and cursor indicators (25)

  • Page 10: Rear Panel

    SUBWOOFER PRE OUT jacks e FM ANTENNA jack and AM ANTENNA terminal m MONITOR OUT V jack f HDMI IN and HDMI output (HDMI OUT MAIN and n AC INLET (Taiwanese models) HDMI OUT SUB) jacks g SPEAKERS terminals See “Connecting the AV Receiver”...

  • Page 11: Remote Controller

    RETURN button k HOME button (42) l SLEEP button (43) ■ Controlling the tuner To control the AV receiver’s tuner, press AM or FM (or RECEIVER). a q/w buttons (31) b D.TUN button (31) c DISPLAY button d CH +/– button (32)

  • Page 12: Connections

    Screw-type speaker terminals Push-type speaker terminals Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends If you’re using only one surround back speaker, connect it to...
  • Page 13 (+) side of each speaker cable in accordance with the table above. Then all you need to do is to match the color of each label to the corresponding speaker terminal. Speaker Connection Precautions Read the following before connecting your speakers: •...

  • Page 14: About Av Connections

    Right! • If your subwoofer is unpowered and you’re using an external good connections (loose connections amplifier, connect the subwoofer pre out jack to an input on the can cause noise or malfunctions). amplifier. • To prevent interference, keep audio...
  • Page 15 • The AV receiver does not support SCART plugs. video sockets slightly differently). • The AV receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s Green removed. Push plugs in all the way.

  • Page 16: Connecting Components With Hdmi

    ✔ Satellite/cable set-top box, etc. Audio Return Channel (ARC) function enables an HDMI or the TV is set to another input source, this may result in no ✔ Game console capable TV to send the audio stream to the HDMI OUT sound from the AV receiver or the sound may be cut off.

  • Page 17: Connecting Your Components

    VIDEO jack. Video signals input from VIDEO will be output from the MONITOR OUT and HDMI output jacks. receiver’s display when changing settings. Do not connect the AV receiver’s USB port to a USB port on ✔: Assignment can be changed (➔ page 51).

  • Page 18: Connecting Onkyo U Components

    • Some components may not support all u functions. Refer to the (➔ page 72). manuals supplied with your Onkyo components. • While Zone 2 is on, the System On/Auto Power On and Direct Change u functions do not work. En-18...

  • Page 19: Connecting The Antennas

    • Never disconnect the power cord from the AV receiver while the • Once your AV receiver is ready for use, you’ll need to tune into a radio station and position the antenna to achieve the best possible other end is still plugged into a wall outlet. Doing so may cause reception.

  • Page 20: Turning On & Basic Operations

    Receiver Press 8ON/STANDBY on the front panel. To ensure smooth operation, here’s a few easy steps to help you configure the AV receiver before you use it for the very first time. These settings only need to be made 8ON/STANDBY Press RECEIVER followed by 8RECEIVER on the once.

  • Page 21: Connections

    The automatic speaker setup is performed The on-screen menus appear only on a TV that is • Pressing HOME will close the setup wizard. To restart the initial following instructions on screen. Refer to step 2 connected to the HDMI OUT MAIN.

  • Page 22: Source Connection

    Remote Mode Setup Network Connection This step checks the connection of source components. With this step, you can enter remote control codes for the This step checks your network connection. components you want to operate. Use q/w to select one of the following options, and Use q/w to select one of the following options, and then press ENTER.

  • Page 23: Playback

    • “iPod/iPhone Playback via Onkyo Dock” (➔ page 61). in the “Screen Saver” setting (➔ page • The screen will return to its previous state if the AV receiver is • “Controlling Other Components” (➔ page operated. To adjust the volume, use VOL q/w.

  • Page 24: Controlling Contents Of Usb Or Network Devices

    (➔ page 70). Pressing this button twice selects the previous song. Note • The buttons you can use will differ depending on the devices and This button fast-reverses the current song. media used for playback. This button pauses playback. SEARCH You can toggle between the playback screen and the list screen during playback.

  • Page 25: Understanding Icons On The Display

    USB device from the USB port. Repeat receiver cannot read the iPod/iPhone. • If you connect an iPod or iPhone to the USB port, no sound will be output from the headphones jack. Shuffle • When connecting your iPod/iPhone with a USB cable, we recommend you use an official USB cable from Apple Inc.

  • Page 26: Playing A Usb Device

    (➔ page 91). • “Network/USB Features” • In this mode, video contents are not displayed, even if they are input from the VIDEO jack on the AV receiver’s front panel. Press USB repeatedly to select the “USB(Front)” or “USB(Rear)” input.

  • Page 27: Listening To Vtuner Internet Radio

    (➔ page 91). The on-screen menus appear Radio. only on a TV that is connected to the HDMI OUT MAIN. Adding to My Favorites The selected program will be added to “My Favorites” The vTuner Internet Radio Service is a portal site featuring on the network service screen, which appears when radio stations from all over the world.

  • Page 28: Registering Other Internet Radio

    AV receiver. depending on the type of data or audio format used by the • If you want to delete a station saved in “My Favorites” list, press Internet radio station, you may not be able to listen to some MENU with the station selected or while the station is playing.

  • Page 29: Playing Music Files On A Server

    Use q/w to select an item, and then press ENTER or 1 to start playback. This section explains how to configure Windows Media Player 11 so that the AV receiver can play the music files You need to connect the AV receiver to your home stored on your computer.

  • Page 30: Remote Playback

    This section explains how to configure Windows Media Start Windows Media Player 12. Note Player 12 so that the AV receiver can play the music files To enable remote playback, you must first configure • Remote playback cannot be used in any of the following cases: stored on your personal computer.

  • Page 31: Listening To Am/Fm Radio

    (Actual display depends on the country.) • Tuning into weak FM stereo stations If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to (Actual display depends on the country.) manual tuning mode and listen to the station in mono.
  • Page 32 Presetting AM/FM Stations Deleting Presets Using RDS (excluding North American and Taiwanese models) You can store a combination of up to 40 of your favorite Select the preset that you want to delete. AM/FM radio stations as presets. See the previous section.
  • Page 33 This is not a malfunction. If the current radio station is broadcasting TP (Traffic Current affairs Affairs • If the signal from an RDS station is weak, RDS data may be Program), “[TP]” will appear on the AV receiver’s Information Info displayed intermittently or not at all.

  • Page 34: Using Basic Functions

    With the supplied calibrated microphone, Audyssey 2EQ ® or other devices. Turn off the cell phone (even if it is not in use) automatically determines the number of speakers microphone tip pointed directly at the ceiling using a or place it away from all audio electronics.
  • Page 35 Note When prompted, repeat step 6. • The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other Use q/w to select an option, and then press ENTER.
  • Page 36 Changing the Speaker Setup Manually ® You can manually make changes to the settings found While Audyssey 2EQ Room Correction and Speaker Setup is in progress, one of the error messages below may during Audyssey 2EQ Room Correction and Speaker appear. Setup. See also: 2EQ: Auto Setup •...

  • Page 37: Using The Listening Modes

    Source Information” (➔ page 43). ■ Listening Mode Buttons • While a pair of headphones is connected, you can select the following listening modes: Pure Audio (European, Australian and Asian models), Mono, Direct, and Stereo. Press RECEIVER first. MOVIE/TV, MUSIC, GAME...
  • Page 38 The illustration shows which speakers are activated in each The AV receiver’s listening modes can transform your modes. channel. See “Speaker Configuration” for the speaker listening room into a movie theater or concert hall, with setup (➔ page 52). This is mono (monophonic) sound.
  • Page 39 Full Mono In this mode, all speakers output the same sound in mono, so the sound you hear is the F u l M o n o same regardless of where you are within the listening room.
  • Page 40 Input Speaker Source Layout Listening Mode Description Input Speaker In this mode, audio from the input source is Source Layout D XCN output without surround-sound processing. Pure Audio *1*2 In this mode, the display and video circuitry D T S...
  • Page 41 These modes use the Dolby Pro Logic IIx the sound. modes to expand 5.1-channel sources for The AV receiver can input the DSD signal from HDMI IN. Depending on the player, setting the 7.1-channel playback. output on the player side to PCM might bring better sound.

  • Page 42: Using The Home Menu

    Using the Home Menu to play music files on a server or to perform remote • If no video signals are present, the thumbnails will be filled in playback, use q/w/e/r to select “dlna” and then The Home menu provides quick access to frequently used black.

  • Page 43: Using The Sleep Timer

    The sleep time can be set from 90 to 10 minutes in 10 Press TV/CD or GAME. minute steps. “TV/CD” or “GAME” appears on the AV receiver’s The SLEEP indicator lights on the AV receiver’s...

  • Page 44: Using The Music Optimizer

    Stereo, unless it’s already set to Stereo, Mono, Direct, or Pure Audio (European, Australian and Asian models). • If you connect an iPod or iPhone to the USB port on the AV Muting the AV Receiver receiver, no sound will be output from the headphones jack.

  • Page 45: Advanced Operations

    Quick setting. Setup or the Setup Menu (HOME). If an HDMI input other than HDMI IN 5, 6, and 7 is ■ Quick Setup assigned to an input selector, a preview of the video...

  • Page 46: Using The Audio Settings Of Quick Setup

    Advanced Operations Speaker Levels Using the Audio Settings of Quick Note Setup • When the “Monitor Out” setting is set to “Sub”, “Video” cannot ■ Subwoofer Level be selected. –15dB to 0dB to +12dB in 1 dB steps You can change various audio settings from the Quick •...
  • Page 47 • The Late Night function can be used only when the input source is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD. • The Late Night function is set to “Off” when the AV receiver is set to standby. For Dolby TrueHD sources, it will be set to “Auto”.

  • Page 48: Using The Setup Menu (Home)

    • The time until the screen saver activates itself can be changed RECEIVER in the “Screen Saver” setting (➔ page 61). • The screen will return to its previous state if the AV receiver is operated. a Main Menu ENTER b Sub Menu...

  • Page 49: About The Hybrid Standby Indicator

    Listening Mode Preset BD/DVD (➔ page CBL/SAT GAME Note TUNER • If Zones are turned on or, if a mobile device connected to the TV/CD Front Input is charging (MHL), the HYBRID STANDBY indicator won’t light. EXTRA1 EXTRA2 Miscellaneous Volume Setup (➔...

  • Page 50: Input/Output Assign

    (➔ page 85) for charts • See “Video Connection Formats” CBL/SAT HDMI2 • If the “Monitor Out” setting is set to “Sub”, this setting is fixed showing how the “Monitor Out” and “Resolution” settings to “Through”. GAME HDMI3 affect the video signal flow through the AV receiver.
  • Page 51 • When composite video and component video sources are • When an HDMI IN is assigned to an input selector in • If you assign “- - - - -” to an input selector that is currently (➔ page 50), the same HDMI IN will be set as upconverted for HDMI OUT SUB, only signals with a resolution “HDMI Input”...

  • Page 52: Speaker Setup

    ■ Subwoofer Select if only one surround back speaker L is Note connected. • When bi-amping is used, the AV receiver is able to drive up to 5.1 2ch: speakers in the main room. ■ Front Select if two (left and right) surround back speakers •...
  • Page 53 “Front” settings are set for the first time to “Yes” and “Full • When the “Powered Zone 2” setting is set to “Yes” and Zone 2 • When the “Powered Zone 2” setting is set to “Yes” and Zone 2 Band”...

  • Page 54: Audio Adjust

    Dimension Main • If the “Powered Zone 2” setting is set to “Yes” and Zone 2 is –3 to 0 to +3 turned on, this setting cannot be selected. With this setting, you can move the sound field forward or Main/Sub ■...

  • Page 55: Source Setup

    Narrow: Note Select if the listening angle is 20 degrees. • When this setting is set to “Off”, the Late Night function for Preparation With this setting, you can optimize the Theater- Dolby TrueHD sources is automatically fixed to “Off”.
  • Page 56 The result is bass response, and 15 dB) that can be selected when the mix level of the Audyssey Dynamic EQ solves the problem of deteriorating tonal balance, and surround impression that remain content is not within the standard.
  • Page 57 When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound • To name a radio preset, select AM or FM, and then select the are out of sync. With this setting, you can correct this by –...
  • Page 58 With “Picture Mode”, you can change the following Full: movie. If it is a movie, the appropriate conversion is settings to be suitable for the movie or game screen by one applied. operation; “Game Mode”, “Film Mode”, “Edge The AV receiver will adjust to the picture source, Enhancement”, “Noise Reduction”, “Brightness”,...
  • Page 59 – “Monitor Out” is set to “Sub”. Note digital and analog inputs. This procedure can also be performed on the remote controller • The setting will be reset to “Off” when you change the setting in by using the Quick Setup (➔ page 45).

  • Page 60: Listening Mode Preset

    ■ DTS/DTS-ES/DTS-HD Listening Mode Preset Use q/w to select the signal format that you want to With this setting, you can specify the listening mode set, and then use e/r to select a listening mode. used when DTS or DTS-HD High Resolution format Only listening modes that can be used with each input digital audio signals are played (DVD, LD, CD, etc.).

  • Page 61: Miscellaneous

    AV receiver is turned on. 9kHz: Nederlands, Svenska, 中文 To use the same volume level that was used when the AV Select the frequency step according to your area. receiver was turned off, select “Last”. This setting determines the language used for the on-screen For AM/FM tuning to work properly, you must specify the menus.
  • Page 62 Note • When the setting is set to “On” and the menu is closed, the names When enabling the HDMI Through function, regardless of • If “On” is selected and the audio can be output from the TV, the of connected p-compatible components and “RIHD On”...
  • Page 63 Note (➔ page and specify the preview display of HDMI models), Off (North American and Taiwanese models) • This setting is fixed to “- - - -” when the “HDMI video streams. Control(RIHD)” setting is set to “Off”. Note Sub Window •...
  • Page 64 If your router’s DHCP server is enabled, you don’t need to Note Class B: change any of these settings, as the AV receiver is set to “172.16.0.0” to “172.31.255.255” • When set to “On”, the power consumption slightly increases in use DHCP to configure itself automatically by default (i.e.,...

  • Page 65: Remote Controller Setup

    ID from “1”, to “2” or “3”. Note • If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

  • Page 66: Zone 2

    (➔ page 52). Zone 2 Note Receiver/ • With this setup, the volume of Zone 2 is controlled by the AV integrated amp receiver. • When Powered Zone 2 is used, playback in the main room is Note reduced to 5.1 channels.

  • Page 67: Controlling Zone 2 Components

    Zone 2. adjust the volume. • When “AUX”, “EXTRA1” or “EXTRA2” is the input source of ZONE2 8RECEIVER Main room and Zone 2 is set to share the same source, no sound INPUT will be output from Zone 2. SELECTOR MUTING...

  • Page 68: Controlling Other Components

    • Set the AV receiver’s Input Display to “DOCK” (➔ page 43). • If you do adjust the volume control on your iPod/iPhone while it’s inserted in the RI Dock, be careful that it’s not set too loud ■ System Function before you reconnect your headphones.

  • Page 69: Controlling Your Ipod/Iphone

    Dock on or off. Also, your iPod/iPhone may not respond the With the RI Control first time you press this button, in which case you should press Make an u connection and enter the remote control code it again. This is because the remote controller transmits the On 81993 (with u).

  • Page 70: Controlling Other Components

    If you cannot control the component, use q/w to enter the remote control code for a component that you • This can only be carried out using the on-screen menu. select “Try next code” and press ENTER. want to control: DVD, TV, CD, etc.

  • Page 71: Entering Remote Control Codes

    Note Within 30 seconds, use the number buttons to enter • If any other button than the colored buttons is pressed, the the 5-digit remote control code. operation will be cancelled. The remote indicator flashes twice.

  • Page 72: Remote Control Codes For Onkyo Components Connected Via U

    Controlling Onkyo components without u Remote Control Codes for Onkyo Resetting the REMOTE MODE Buttons If you want to control an Onkyo component by pointing the Components Connected via u You can reset a REMOTE MODE button to its default remote controller directly at it, or you want to control an remote control code.

  • Page 73: Controlling Other Components

    ■ Blu-ray Disc player / HD DVD player operation p doesn’t work very well, program your TV’s Available buttons remote control code into TV and use the TV remote mode b TOP MENU h 8SOURCE to control your TV. i DISPLAY...
  • Page 74 Number: +10 Note ■ Cassette tape deck operation • With some components, certain buttons may not work as expected, and some may not work at all. Available buttons • See “Controlling Your iPod/iPhone” about the operation of e 1, t (Reverse...

  • Page 75: Appendix

    HDMI OUT MAIN. If your TV is ■ There’s no sound, or it’s very quiet If you have any trouble using the AV receiver, look for a connected to other video outputs, use the AV solution in this section. If you can’t resolve the issue receiver’s display when changing settings.
  • Page 76 Appendix ■ Noise can be heard If the input signal format is set to “PCM” or “DTS”. When Powered Zone 2 is used, playback in the main Set it to “Off”. room is reduced to 5.1channels and the front high and Using cable ties to bundle audio cables with power —...
  • Page 77 — If your TV is connected to the HDMI output(s), select displayed. direct sunshine or inverter-type fluorescent lights. “- - - - -” in the “HDMI Input” setup to watch Relocate if necessary. composite video, and component video sources. ■...
  • Page 78 Make sure your iPod/iPhone is properly inserted in — the remote controller at that component. the Dock. If your iPod/iPhone is in a case, it may not Check the network connection between the AV To control an Onkyo component that’s connected via connect properly to the Dock.
  • Page 79 Appendix ■ The display doesn’t work To turn the setting off, repeat the above process so that USB Device Playback “Video ATT :Off” appears on the AV receiver’s The display is turned off when the Pure Audio — ■ display, and release the buttons.
  • Page 80 If the video source is connected to a composite video input, select the relevant input selector, and assign it to “- - - - -”. • To by-pass the upconversion, set the “Picture Mode” setting to “Direct” (➔ page 58).

  • Page 81: Firmware Update

    • If the USB device is partitioned, each section will be treated as an iPod/iPhone, USB or servers, etc. independent device. • If the USB device contains a lot of data, the AV receiver may take a while to read it. To be continued •...
  • Page 82 The Home menu appears on the TV screen. do not need to do anything further. If an error occurs due to a wrong selection of input sources, Select “Firmware Update” and press ENTER. turn off and on the AV receiver. Then retry the update.
  • Page 83 ONKAVR****_************.zip turning the AV receiver off and on again. • Never plug or unplug an HDMI cable or a USB device during the Unzip the downloaded file. The following three files update process. Do not turn off the AV receiver and do not remove the are created: •...
  • Page 84 Visit the Onkyo web site for the latest then reconnect the AC power cord and try again. update. Case 4: If an error occurs due to a wrong selection of input sources, turn off and on the AV receiver. Then retry the update. En-84...

  • Page 85: Connection Tips And Video Signal Path

    AV equipment. The picture quality. and HDMI OUT SUB of the AV receiver to your TV. format you choose will depend on the formats supported by Note that video signals are output from both HDMI outputs your components.
  • Page 86 ■ Signal Selection Audio Connection Formats If signals are present at more than one input, the inputs will be selected automatically in the following order of priority: Audio components can be connected by using any of the HDMI, component video, composite video.
  • Page 87 Appendix Video Resolution Chart The following tables show how video signals at different resolutions are output by the AV receiver. NTSC/PAL ✔: Output available Output HDMI Component Composite Input 1080p/24 1080p 1080i 720p 480p/576p 480i/576i 1080p 1080i 720p 480p/576p 480i/576i 480i/576i ✔...

  • Page 88: Using An Rihd-Compatible Tv, Player, Or Recorder

    CEC (Consumer Electronics Control), which allows Players/Recorders • You can set on the menu screen of the TV to either output system control over HDMI and is part of the HDMI the audio from the speakers connected to the AV •...
  • Page 89 1. Turn on the power for all connected components. on the player models.) 2. Turn off the power of the TV, and confirm that the • Even if you set to output audio on the TV speakers, audio HDMI power of the connected components is turned off...

  • Page 90: About Hdmi

    PC are not supported. DSD and Multichannel PCM. • The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there’s no sound from a component connected via HDMI, check its setup.

  • Page 91: Network/Usb Features

    64). network is recommended. Although it’s possible to play • The AV receiver does not support PPPoE settings, so if you have The following diagram shows how you can connect the AV music on a computer that’s connected to the network a PPPoE-type Internet connection, you must use a PPPoE- receiver to your home network.
  • Page 92 Storage” will be displayed. Modem: 28.8 kbps • The computer or media server must be on the same • If you connect a USB hard disk drive to the AV receiver’s USB Sound card: 16-bit sound card network as the AV receiver.
  • Page 93 For server playback and playback from a USB device, the The Digital Living Network Alliance is an international, • Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, AV receiver supports the following music file formats. cross-industry collaboration. Members of DLNA develop a 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz,...

  • Page 94: License And Trademark Information

    All Rights Reserved. the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

  • Page 95: Specifications

    Appendix ■ Specifications Video Section HDMI Input IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7, AUX Input Sensitivity/Output Level and Impedance Amplifier Section INPUT 1 Vp-p/75 Ω (Component Y) Output OUT MAIN, OUT SUB 0.7 Vp-p/75 Ω...
  • Page 96 The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK Tel: +44-(0)1628-473-350 Fax: +44-(0)1628-401-700 Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.onkyochina.com/ 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/...
  • Page 97 AV receiver. Using Last.fm Internet Radio ......5 Select the desired service and press ENTER. • Some of the services don’t allow the use of multiple user The top page of the selected service appears. accounts.

  • Page 98: Pandora ® Internet Radio -Getting Started (U.s. Only)

    Don’t play the song for a month: your account and stations you can return to your If you are tired of a song, you can put the song to sleep Onkyo receiver and press enter to begin listening to and Pandora will not play it for one month.

  • Page 99: Using Rhapsody (U.s. Only)

    Use q/w to select a channel, and press ENTER or Search: 1 to start playback. Use q/w to select “Sign in to your account” and then You can search for music by Artist, Album, or Track. Playback starts and the playback screen appears.

  • Page 100: Using The Siriusxm Internet Radio (North American Only)

    Setup. If you don’t know your username or password, www.sirius.com). Be sure to read this agreement before many days are left in your trial. After the trial period call Sirius XM at (888) 539-7474 for assistance. you purchase your subscription. Sirius, XM and all related expires, if you want to continue listening to the service, marks and logos are trademarks of Sirius XM Radio Inc.

  • Page 101: Using Last.fm Internet Radio

    Last.fm is a music service that learns what you love... Tracks”, “Library” and “Neighbours”. If you have the existing Last.fm account, you can sign Your new Onkyo AV receiver is very clever. If you have a Account Info: in to your account to select “Sign in to your free Last.fm account, it will keep track of all the songs...

  • Page 102: Using Slacker Personal Radio

    Using Internet Radio You can control the tracks with the buttons on the Using Slacker Personal Radio remote control. If you do not have an account, create one on the Enabled buttons: 1, 3, 2, 6 Slacker website (www.slacker.com) with your ■...
  • Page 103 Remarque Utilisation de SiriusXM Internet Radio Les éléments de menu suivants s’affichent : • Les services disponibles peuvent varier en fonction de la région. (Amérique du Nord uniquement) .... 4 Add new user : Remove this user : Appuyez sur NET.

  • Page 104: Pandora ® Internet Radio -Pour Commencer (États-Unis Uniquement)

    à votre récepteur Onkyo et appuyez Si vous en avez assez d’une chanson, vous pouvez sur entrée pour écouter votre webradio Pandora mettre la chanson « au repos » et Pandora ne la lira PANDORA, le logo PANDORA, et l’habillage personnalisée.

  • Page 105: Utilisation De Rhapsody (Etats-Unis Uniquement)

    à la liste My Favorites. consultez « Utilisation de plusieurs comptes » (➔ page Conseil L’identification peut être réalisée à partir de l’écran « Users ». • Vous pouvez supprimer des pistes, des albums et des canaux Rhapsody marqués de My Library. Fr-3...

  • Page 106: Utilisation De Siriusxm Internet Radio (Amérique Du Nord Uniquement)

    Saisissez votre nom utilisateur et votre mot de passe (voir www.sirius.com). Assurez-vous de lire cet accord le nombre de jours restants dans votre essai. Une fois la dans l’écran clavier suivant ou dans Configuration avant d’acquérir votre abonnement. Sirius, XM et tous les période d’essai expirée, si vous souhaitez continuer à...

  • Page 107: Utilisation De La Webradio Last.fm

    Vous pouvez lire des pistes des tags les mieux évalués. Tag Radio : Personal Station : Funk polonaise ? Death pop ? Pensez à un style et nous Vous pouvez lire des pistes de votre station vous divertirons avec pendant des heures.

  • Page 108: Utilisation De Slacker Personal Radio

    Vous pouvez contrôlez les pistes avec les touches sur Utilisation de Slacker Personal Radio la télécommande. Si vous ne possédez pas de compte, créez-en un à Boutons activés : 1, 3, 2, 6 partir du site Web de Slacker (www.slacker.com) à...
  • Page 109 Uso de Rhapsody (sólo EE.UU.)....3 Pulse MENU cuando aparezca la pantalla de Nota usuarios. • Los servicios disponibles pueden variar de una región a otra. Aparecerán los siguientes elementos del menú: Uso de SiriusXM Internet Radio (solo Add new user: Norteamérica) ...........

  • Page 110: Pandora ® Internet Radio -Primeros Pasos (Solo Ee.uu.)

    Delete this station: Pandora ® Internet Radio Utilice q/w para seleccionar la emisora en la lista de emisoras y luego pulse ENTER. Esto eliminará de forma permanente una emisora de –Primeros pasos (solo EE.UU.) su cuenta de Pandora. Toda la información sobre sus Se inicia la reproducción y aparece la pantalla de...

  • Page 111: Uso De Rhapsody (Sólo Ee.uu.)

    Marca las emisoras de Rhapsody que se están reproduciendo actualmente. Add to My Favorites: Añade una canción, emisora o lista de reproducción a la lista Mis favoritos. Consejo • Puede eliminar las canciones, los álbumes y las emisoras de Rhapsody marcados de Mi biblioteca. Es-3...

  • Page 112: Uso De Siriusxm Internet Radio (Solo Norteamérica)

    Lea atentamente este acuerdo antes de aparece a continuación o en la configuración web. Si muestra los días que quedan de la prueba. Una vez que comprar la suscripción. Sirius, XM y todas las marcas y no sabe su nombre de usuario o la contraseña, llame a...

  • Page 113: Uso De Last.fm Internet Radio

    Utilice q/w para seleccionar “Sign in to your account”, y luego pulse ENTER. Puede reproducir pistas de “Recently Listened Last.fm es un servicio musical que sabe lo que le gusta... Tracks”, “Library” y “Neighbours”. Si ya tiene una cuenta de Last.fm, puede acceder a ella Su nuevo receptor de AV Onkyo es muy inteligente.

  • Page 114: Uso De Slacker Personal Radio

    Puede controlar las pistas con los botones del Uso de Slacker Personal Radio mando a distancia. Si no tiene una cuenta, cree una en el sitio web de Botones activados: 1, 3, 2, 6 Slacker (www.slacker.com) con su ordenador. ■...
  • Page 115 Uso de Internet Radio Notas Es-7...
  • Page 116 Y1112-1 SN 29401189A (C) Copyright 2012 Onkyo Sound & Vision Corporation Japan. All rights reserved. * 2 9 4 0 1 1 8 9 A *...
  • Page 117 If it flashes, verify that the Ethernet cable is firmly connected to the AV receiver. Select the desired service and press ENTER. • Some of the services don’t allow the use of multiple user The top page of the selected service appears. accounts.
  • Page 118 Last.fm is a music service that learns what you love... Tracks”, “Library” and “Neighbours”. If you have the existing Last.fm account, you can sign Your new Onkyo AV receiver is very clever. If you have a Account Info: in to your account to select “Sign in to your free Last.fm account, it will keep track of all the songs...
  • Page 119 Die oberste Seite des ausgewählten Services erscheint. Nutzerkonten zu. • Sie können bis zu 10 Nutzerkonten speichern. • Um zwischen den Konten umzuschalten, müssen Sie sich zuerst aus Ihrem aktuellen Konto ausloggen und sich dann wieder auf dem „Users“ Bildschirm einloggen.
  • Page 120 Sender wiedergeben („Your Library“, „Your Die aktuellen Nutzungspreise und umfassende Infos sind Neighbourhood“ und „Your Recommendations“). unter www.last.fm/subscribe erhältlich Y1112-1 SN 29401229 (C) Copyright 2012 Onkyo Sound & Vision Corporation Japan. All rights reserved. * 2 9 4 0 1 2 2 9 *...
  • Page 121 • Besides, it is not possible to add new codes to the existing remote controller presets. • Though the provided remote control codes are correct at the time of printing, they are subject to change by the manufacturer.
  • Page 122 • Cuando hay múltiples códigos relacionados con un fabricante, pruebe a introducirlos uno a uno • Quand il y a de multiples codes liés à un fabricant, essayez-les et entrez-les un par un jusqu’à ce hasta que coincida con su componente.
  • Page 123 “Remote Mode” e tasto “Display”. Beispiel „Remote Mode“ (Fernbedienungsmodus)-Taste und „Display“-Taste. Note: Hinweise: • I codici di controllo del telecomando non possono essere inseriti per [RECEIVER] e i tasti multi • Der Fernbedienungscode kann nicht [RECEIVER] und der Multi-Zonen-Taste zugeordnet werden. zona.
  • Page 124 Genom att ange en kod från fjärrkontrollkodlistan, kan du aktivera relevanta REMOTE MODE/Remote-indicator eenmaal traag knipperen. förvalda kanaler för den utrustningen. • När det finns flera olika koder för en tillverkare ska du försöka att ange dem en och en tills de Opmerkingen: stämmer överens med din utrustning.
  • Page 125 • [RECEIVER （接收机）] 和多区域按钮不能输入遥控编码。 • [RECEIER] （接收機）和多區域按鈕不能輸入遙控編碼。 • 只能为 [TV （电视）] 输入电视遥控编码。 • 您只能為 [TV] （電視）輸入電視遙控編碼。 • 除 [RECEIVER （接收机）]、[TV （电视）] 和多区域按钮外，不能为 REMOTE MODE （遥 • 除 [RECEIVER] （接收機） 、[TV] （電視）和多區域按鈕外，您可針對 REMOTE MODE 控模式）按钮指定任何类别的遥控编码。 但是，这些按钮仍可用作输入选择器按钮，因 （遙控模式）按鈕指定任何類別的遙控編碼。 但是，這些按鈕仍可用作為輸入選擇器按 此，选择与设备所要连接的输入端对应的 REMOTE MODE（遥控模式） 按钮。 例如，如果...
  • Page 126 Remote Control Codes Dedicated Onkyo Receiver Cable Set Top Box Cable Set Top Box Cable/PVR Combination Default 62503 mio TV 02802 Toshiba 01509 Samsung 01877 Zone 2 62506 Motorola 01376, 00858, 01562, 01582 Scientific Atlanta 01877, 01982 01982, 01998, 02378...
  • Page 127 70157 Zonda 70157 Technology Revox 40029 Onkyo 71817 Cairn 70157 CD-R Sansui 40029 Optimus 70000, 70032 California Audio Labs 70029, 70303 Denon 70626, 70766 Sony 40243 Panasonic 70029, 70303 Cambridge 70157 70072 Thorens 40029 Philips 70626, 70157 Cambridge Audio 70157...
  • Page 128 Remote Control Codes Accessory Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Polk Audio 82228 Amstrad 00847, 01175, 01662, 01413, 01567 Durabrand 01284 01693 Chess 01334, 01626 Echostar 00775, 00853, 01323, Ansonic 02418 01409, 02527 Video - Accessory...
  • Page 129 Remote Control Codes Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Hama 01567 Leiko 01626 Pace 00847, 00853, 00887, Sat Industrie 01611 01175, 01323, 01356, Hanseatic 01100 Lemon 01334 SAT+ 01409 01423, 01662, 01693,...
  • Page 130 Remote Control Codes Satellite Set Top Box Satellite Set Top Box SAT/PVR Combination SAT/PVR Combination Star 00887 00642 BskyB 01175, 01662 Schneider 01206 Stream System 01300 00879, 01356 Bush 01645 Sedea Electronique 01206 Strong 00853, 00879, 01284, United 01251, 01626, 02418...
  • Page 131 Remote Control Codes Television Television Television Television Akai 10178, 10556, 10037, Basic Line 10556, 10037, 10668, Casio 10037 Dick Smith 10698 10714, 10715, 10208, 11037 Electronics Cathay 10037 11675 Baur 10037, 10195, 10512 Digatron 10037 10037 Akiba 10037 Beaumark 10178...
  • Page 132 Remote Control Codes Television Television Television Television Erres 10037 Genesis 10037 Hisense 10556, 10508, 10208, 10037 11363, 12098 10171 Genexxa 10037 11709 Hitachi 10150, 10178, 10037, 10037 10171, 11864, 11886 Jinfeng 10208 10634, 11037, 10508, Euroman 10037 Godrej 11585 Jinxing...
  • Page 133 Remote Control Codes Television Television Television Television Lifetec 10037, 10714, 10668, Medion 10556, 10037, 10714, Naiko 10037 Onix 10698 11037, 12001 10668, 11037, 10698, Nakimura 10037 Onkyo 11807, 13100, 13500 10512, 11248, 11585, Linsar 11585 National 10508, 10208 11667, 11709...
  • Page 134 Remote Control Codes Television Television Television Television Phoenix 10037 Reflex 10037, 10668, 11037 Sei-Sinudyne 10037 SunBriteTV 11610 Phonola 10556, 10037 Relisys 11585 Serie Dorada 10178 Sungoo 11248 Pioneer 10037, 10698, 10512, Remotec 10171, 10037 Shanghai 10208 Sunny 10037 11457, 11636, 12171...
  • Page 135 Remote Control Codes Television Television Television Technosonic 10556, 10625, 10499, Toyoda 11709 11365, 12098 Humax 20739 11324 TRANS-continents 10556, 10037, 10668, Walker 11667 Panasonic 20614, 20616 Techvision 11709 11037 Waltham 10037, 10668, 11037 Philips 20739 Techwood 11037, 11667 Transonic 10037, 10698, 10512,...
  • Page 136 31354, 32056, 32084, Go Video 30741 32434, 32689 C-Tech 31152 Luxman 30573 GoldStar 30741 Pioneer 30571, 30142, 30631, California Audio Labs 30490 Luxor 30713 31571, 32442, 32860 Goodmans 30713, 31152 Cambridge Audio 32808 Magnavox 30503, 30539, 30646, Polk Audio 30539...
  • Page 137 Remote Control Codes Blu-ray Disc Radionette 30741 Sylvania 30630, 30675 Yamaha 30490, 30539, 30646, Sony 31516, 32180 30817, 31354, 32298, Radiotone 30713 Symphonic 30675 Sylvania 30675 32299 30522, 30571, 32213, Tamashi 31394 Toshiba 32551, 32705, 33157 Zenith 30503, 30741 32587...
  • Page 138 Remote Control Codes DVD-R TV/DVD Combination Victor 31597 Magnavox 12372 Yamaha 30646 Matsui 11037, 30713 Zenith 30741 Medion 12719 Nordmende 12001 HD-DVD Odys 12719 Integra 32901, 33104 33504 Panasonic 12170 30741 Philips 11454, 10556, 11394, 30539 Microsoft 32083 Powerpoint 10698...
  • Page 139 Remote Control Codes Memo...
  • Page 140 Y1112-1 SN 29401094 (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 1 0 9 4 *...

This manual is also suitable for:

Tx-nr515

Table of Contents