Table of Contents
Advertisement
Initial Setup
This section explains the settings that we recommend you
to make before using the AV receiver for the very first
time. A setup wizard is launched upon first-time use to let
you perform those settings.
The on-screen menus appear only on a TV that is
connected to the HDMI OUT MAIN.
Selecting the Language for the
Onscreen Setup Menus
This step determines the language used for the onscreen
setup menus. See "Language" in "OSD Setup"
(➔ page
61).
Tip
• Pressing HOME will close the setup wizard. To restart the initial
setup, select "Initial Setup" in the "Hardware Setup" menu
(➔ page
64).
After selecting the language for on-screen setup menus, a
welcome screen is displayed.
Initial Setup
Welcome to initial setup. Have you connected all
the speakers and devices? Before starting, please connect speakers
and sources. Now, would you like to start initial setup?
1st Step : Audyssey 2EQ: Auto Setup
2nd Step : Source Connection
3rd Step : Remote Mode Setup
4th Step : Network Connection
Yes
No
1
Use q/w on the AV receiver or remote controller to
select one of the following options, and then press
ENTER.
Yes:
Continues to "Audyssey 2EQ: Auto Setup".
No:
Skips the settings and terminates the initial
setup. The setup wizard goes to "Terminating the
Initial Setup". You can always restart the initial
setup by selecting "Initial Setup" in the
"Hardware Setup" menu
(➔ page
En-21
Audyssey 2EQ: Auto Setup
This step performs the automatic speaker setup.
1
Use q/w to select one of the following options, and
then press ENTER.
Do it Now:
The automatic speaker setup is performed
following instructions on screen. Refer to step 2
of "Using the Automatic Speaker Setup"
(➔ page
setup wizard continues to "Source Connection".
Do it Later:
Skips this setting.
Press ENTER and continue to "Source
Connection".
HOME
Exit
64).
Turning On & Basic Operations
34). When this setting is complete, the
Hide quick links:
Advertisement
Chapters
Table of Contents
