Using The Sleep Timer - Yamaha HTR-6025 Owner's Manual

Playback
■ Displaying the signal information
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
Press D AMP and then press P MENU on
1
the remote control.
"BASIC SETUP" appears in the front panel display.
;BASIC SETUP
2
Press G k / n repeatedly to select "SIGNAL
INFO" and then press G ENTER.
3
Press G k / n to switch the displayed
information.
The following information about the input source
appears in the front panel display.
Display
FORMAT
Signal format.
The number of samples per second taken
SAMPL.
from a continuous signal to make a discrete
signal.
The number of source channels in the input
CH
signal (front/surround/LFE).
The number of bits passing a given point
B.RATE
per second.
Flag data encoded in DTS, Dolby Digital,
FLAG
or PCM signals that cue this unit to
automatically switch decoders.
Press P MENU to exit.
4
30
En
Description

■ Using the sleep timer

Use this feature to automatically set this unit to the
standby mode after a certain amount of time.
Press D AMP and then press O SLEEP
repeatedly to set the amount of time.
Each time you press O SLEEP, the front panel display
changes as shown below.
SLEEP 120min
SLEEP OFF SLEEP 30min
The SLEEP indicator flashes while you are switching the
amount of time for the sleep timer. Once the sleep timer is
set, the SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound field
program.
y
• To cancel the sleep timer, press O SLEEP on the remote
control repeatedly until "SLEEP OFF" appears in the front
panel display.
• You can also cancel the sleep timer setting by pressing
1 STANDBY/ON (or M STANDBY) to set this unit to the
standby mode.
■ Playing video sources in the
background
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons on the remote
control to select a video source and then an
audio source.
MULTI CH IN
CD MD/CD-R TUNER
DVD DVD DTV/CBL DVR
V-AUX
SLEEP 90min
SLEEP 60min
Audio sources
Video sources