Using The Sleep Timer - Yamaha R-N500 Owner's Manual

Using the sleep timer

Use this feature to automatically set this unit to standby
mode after a certain amount of time. The sleep timer is
useful when you are going to sleep while this unit is
playing or recording a source.
SOURCE
ID DIMMER
COAX1 COAX2
LINE1 LINE2
TUNER CD
Note
The sleep timer can only be set with the remote control.
1
Press SLEEP repeatedly to set the amount of
time before this unit is set to standby mode.
Each time you press SLEEP, the front display
changes as shown below.
The SLEEP indicator blinks while setting the amount
of time for the sleep timer.
Sleep 120min.
If the sleep timer is set, the SLEEP indicator on the
front display lights up.
y
• To disable the sleep timer, select "Sleep Off".
• The sleep timer setting can also be canceled by pressing
RECEIVER A on the remote control to set this unit to standby
mode.
CODE SET
RECEIVER
RECEIVER A
SLEEP
SLEEP
SPEAKERS
A B
OPT1 OPT2
LINE3 PHONO
USB NET
VOL.
SLEEP SLEEP SLEEP
SP A
SW
L
R
Playback
17
En