Adjusting The Tonal Quality; Selecting Audio Input Jacks - Yamaha HTR-6025 Owner's Manual

2
Press G l / h to adjust the effect level while
"NIGHT:CINEMA" or "NIGHT:MUSIC" is
displayed in the front panel display.
Choices: MIN, MID, MAX
• Select "MIN" for minimum compression.
• Select "MID" for standard compression.
• Select "MAX" for maximum compression.
y
"NIGHT:CINEMA" and "NIGHT:MUSIC" adjustments are
stored independently.
Notes
• You cannot use the night listening modes in the following cases:
– when the component connected to the MULTI CH INPUT
jacks is selected as the input source.
– when headphones are connected to the PHONES jack.
• The night listening modes may vary in effectiveness depending
on the input source and surround sound settings you use.

■ Selecting audio input jacks

(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend setting audio input jack select to "AUTO" in
most cases.
• You can adjust the default audio input jack select of this unit by
using "AUDIO SELECT" in "OPTION MENU" (see page 45).
Press E AUDIO SELECT (or B AUDIO SEL)
repeatedly to select the desired Audio input jack
select setting.
DVR V-AUX
A.SEL: AUTO
Audio input jack
select setting
AUTO
Automatically selects input signals in the
following order:
(1) Digital signals
(2) Analog signals
ANALOG
Selects only analog signals. If no analog
signals are input, no sound is output.
Note
This feature is not available when no digital input jack are
assigned to the currently selected input source.
DTV/CBL DVD MD/CD-R TUNER CD

■ Adjusting the tonal quality

Use this feature to adjust the balance of bass and treble for
the front left and right speaker channels.
Press 0 TONE CONTROL repeatedly to select
"BASS" or "TREBLE" and then press
A PROGRAM l / h to adjust the corresponding
frequency response level.
• Select "BASS" to adjust the low-frequency response.
• Select "TREBLE" to adjust the high-frequency
response.
Notes
• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency
sound to an extreme level, the tonal quality of the surround
speakers may not match that of the front left and right speakers.
■ Adjusting speaker levels during
playback
You can adjust the output level of each speaker while
listening to a music source.
Note
This operation will override the level adjustment made in "SP
LEVEL" (see page 41).
Press D AMP and then press F LEVEL
1
repeatedly to select the speaker you want to
adjust.
Display
FRONT L
Front left speaker
FRONT R
Front right speaker
CENTER
Center speaker
SWFR
Subwoofer
SUR.L
Surround left speaker
SUR.R
Surround right speaker
y
Once you press FLEVEL on the remote control, you can
also select the speaker by pressing G k / n.
2
Press G l / h on the remote control to
adjust the speaker output level.
The control range is from –10 dB to +10 dB.
y
You can press 4 A/B/C/D/E to select a speaker and then
5 PRESET/TUNING l / h to adjust the speaker output level.
Playback
Adjusted speaker
29
En