Using Set Menu - Yamaha HTR-6025 Owner's Manual

Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
Parameter
A)DISPLAY SET
B)MEMORY GUARD
C)AUDIO SELECT
D)PARAM. INI
■ Signal information
Use this feature to check audio signal information (see page 30).

Using set menu

Use the remote control to access and adjust each
parameter.
y
You can change the set menu parameters while this unit is
reproducing sound.
Press D AMP and then press P MENU on
1
the remote control.
"BASIC SETUP" appears in the front panel display.
.
BASIC SETUP
2
Press G k / n to select "MANUAL SETUP".
.
MANUAL SETUP
Press G ENTER to enter "MANUAL SETUP".
3
"1 SOUND MENU" appears in the front panel
display.
1 SOUND MENU
Adjusts the brightness of the front panel display.
Locks sound field program parameters and other set menu settings.
Designates the default audio input jack select setting mode for the input sources connected
to the DIGITAL INPUT jacks when you turn on the power of this unit.
Sets all the parameters of the sound field programs to the initial factory settings.
SIGNAL INFO
Features
4
Press G k / n repeatedly and then press
G ENTER to select and enter the desired
menu.
The following menus appear in the front panel
display as you press G k / n repeatedly.
1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
5
Press G k / n repeatedly and then press
G ENTER to select and enter the desired
submenu.
• Repeat steps 5 and 6 to navigate to and enter the
items you want to adjust.
• To return to the previous menu level, press H
RETURN.
6
Press G k / n to select the desired parameter
and then G l / h to change the parameter
value.
• Press G h to increase the value.
• Press G l to decrease the value.
Press P MENU to exit from set menu.
7
Set menu
Page
45
45
45
45
39
En