What Do You Want To Do With This Unit - Yamaha HTR-6025 Owner's Manual

Case C: "I want to listen to a music program from
the FM radio station..."
Press F SCENE 4 (or
E SCENE 4) to select
"Radio Listening".
Notes
• To use the "Radio Listening" template, you must tune into
the desired radio station in advance. See pages 34 to 36 for
tuning information.
• To achieve the best possible reception, orient the
connected AM loop antenna, or adjust the position of the
end of the indoor FM antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 23 for details.
■ After using this unit...
Press 1 STANDBY/ON on the front panel to set
this unit to the standby mode.
This unit is set to the standby mode. To turn on this unit
from the standby mode, press 1 STANDBY/ON (or
L POWER) on the front panel. See page 18 for details.
Note
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
■ Using various input sources
• Basic controls of this unit
• Enjoying FM/AM radio programs
■ Using various sound features
• Using various sound field programs
■ Adjusting the parameters of this unit
• Optimizing the speaker parameters for your
listening room (BASIC SETUP)
• Manually adjusting various parameters of
this unit
• Setting the remote control
• Adjusts the advanced parameters
■ Additional features
Automatically turning off this unit
Quick start guide
☞
P. 23
☞
P. 27
☞
P. 34
☞
P. 31
☞
P. 21
☞
P. 38
☞
P. 46
☞
P. 50
☞
P. 30
9
En