Inspecting By Count (Count); Basic Setting Procedure - Omron ZFV-C Manual

Section 4

Inspecting by Count (COUNT)

Inspecting by Count (COUNT)

Select this item when counting the number of workpieces. The edges in the
teaching area are detected, and judgment is performed by comparing the num-
ber of edges with a reference value. This item is suitable for applications such as
inspecting the number of cookies in a box, checking the number of leads and
counting cables.
Example: Checking the number of lead
COUNT
COUNT

Basic Setting Procedure

■ Teaching
Enclose the area to be inspected using a rectangular box and then perform teaching.
A change in brightness such as "light to dark to light" or "dark to light to dark" is counted as "1".
In the above example, the count is 5.
ZFV-C
78
User's Manual
OK
OK
NG due to the num-
NG
ber of lead is few
Inspection
area setting
COUNT
Teaching
OK