Omron ZFV-C Manual page 155

Adjusting the Inspection Area
6.
Select [REG.] and press the SET Key.
7.
Adjust the size of the inspection area and
press the SET Key.
Enlarge/reduce the screen's green frame so
that the inspection area is slightly larger than
than the workpiece.
8.
Adjust the position of the inspection area
and press the SET Key.
Move the green frame so that the target is cen-
tered in the inspection area.
Selecting the Color to be Inspected
9.
Select [PICK] and press the SET Key.
10.
Select [PICKAREA] and press the SET Key.
11.
Adjust the size of the color pickup area and
press the SET Key.
Enlarge/reduce the window's red frame of the
screen so that the color to be selected is
located inside the area.
Detecting Mixed Varieties of Campaign Seals (Area)
Section 7
TEACH/AREA2
1
point
ITEM REG.
PICK
TEACH/REG.
Zooms in/out
in vertical
direction.
1
point
Zooms in/out
horizontal
direction.
SIZE
TEACH/REG.
Vertical
direction
1
point
Horizontal
direction
SIZE
TEACH/AREA2
1
point
ITEM REG.
PICK
TEACH/PICK
1
point
PICKAREA
PICKCOL
TEACH/PICK
Zooms in/out
in vertical
direction.
1
point
Zooms in/out
horizontal
direction.
SIZE
ZFV-C
User's Manual
153